Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
THE INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SONY ELECTRONICS INC. DISPLAY PRODUCTS GROUP 1 SONY DRIVE, MD 3D9 PARK RIDGE, NJ 07656 TEL# (201)-930-1000, FAX# (201)-358-4303 1.0 1.0 The purpose of this information is to provide the specification for a product whose primary purpose is the reproduction of video information for one or more viewers. This reproduction of this information is to be accomplished via a direct-view CRT monitor. This document provides the minimum specifications for this device. The performance comparison of displays is not only technical in nature, but is also subjective to the user, when viewed in the final display environment. It is recommended that devices meeting the requirements of this specification be compared in the user’s application and environment, if possible. 2.0 Description This product shall be classified as a direct-view CRT color monitor, or propduction display. This device shall be directly compatible with video sources, without the use of external devices to provide this compatibility. This device shall employ the use of an HR Trinitron CRT for optimum display of high- resolution sources. This device shall be encased in a metal enclosure for durability. 3.0 Source Compatibility / Suitability for Application 3.1 Compatible Display Formats SMPTE 170M NTSC SMPTE 240M 1035 line HDTV SMPTE 274M 1080 line HDTV SMPTE 296M 720 line HDTV SMPTE 145 type C phosphor standard ITU 601 colorimetry ITU 709-2 colorimetry 3.2 Compatible Input Formats SMPTE 170M NTSC Composite ITU 601 PAL Composite SMPTE 259M 525/625 Component serial digital video SMPTE 292M HD Component serial digital video 4.0 4.0 Control of this device shall be accomplished through one of the following methods: Parallel Remote Control RS-485 Serial Control This device shall provide a Type II PCMCIA card slot to store monitor settings locally. The optional parallel remote control shall provide access to all monitor setup functions. The serial control jack shall employ the use of a standardized device control protocol that is understood by external control unit available as an accessory. This control jack shall accept bi-directional serial commands that provide full control over the device. All monitor control functions shall be available for control through the serial control jack. This jack shall be capable of connection to an optional serial controller that is capable of controlling up to 32 monitors. This optional controller shall be capable of storing monitor settings using a Type II PCMCIA flash card. Monitor control functions also include auto landing, uniformity adjustments, and auto white balance setup using Minolta, Philips, Thoma, and Grasby light probes. 5.0 Performance Specifications This device shall employ the use of an HR Trinitron CRT with a minimum CRT resolution of 1000 lines in 16:9 mode and 1000 lines in 4:3 mode. The CRT shall employ the use of SMPTE-C phosphors. This device shall be equipped with color temperature alignmen...
Dieses Handbuch ist für folgende Modelle:Monitore - BVM-D24E1WU (33.13 kb)