Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. Bass Controls the softer sounds in the output. When you turn up the bass, it will increase the output to the lower frequency range. Reset Resets the sound mode to the default setting. TIME Settings 1 Press MENU to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. TIME OK Move Clock Off Time : Off On Time : Off Sleep Timer : Off Power On Delay : Off Auto Off : 15 min. Automatic Standby : 4hours The available time settings are described in the following: Setting Description Clock Sets the time feature. Off/On Time Sets the time to turn on or off the monitor. Sleep Timer Sets the length of time until the monitor to turns off. When you turn the monitor off and turn it on again, the Sleep Timer will be set to off. Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. Auto off If Auto off is active and there is no input signal, the set switches to off mode automatically after 15 minutes. Automatic Standby If you do not use the monitor for more than 4 hours, it will be in off mode automatically. NOTE yyOff/On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time. yyThe scheduled power-off function works properly only when the device time is set correctly. yyWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time if the set is turned on, and vice versa if the set is turned off. yyThe Automatic Standby and Auto off functions may not be available in some countries. Setting Description Tile Mode Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5) - 15 x 15 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. Auto Config. Adjusts the screen position automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. PC Position Moving the screen position horizontally and vertically. PC Size Adjust the horizontal and vertical size of the screen taking into account the size of the bezel. Natural The image is omitted by the distance between the screens to be naturally shown. Reset Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. NOTEyyIf Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be disabled to provide the same picture quality as other displays. PIP/PBP Videos or photos stored on the USB device can be displayed on a single monitor by dividing them into the main and subscreens. Option Mode Sets the type of secondary screen. *OFF: Disables the secondary screen. *PIP (Picture In Picture): Displays the secondary screen in the main screen. *PBP (Picture By Picture): Displays the secondary screen next to the main screen. Position Adjusts the position of the subscreen (top left, bottom left, top right, bottom right) The default value is inthe bottom right. Size Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size: 0) is 480x270; the maximum size (Size: 10) is 960x540. NOTEyyThe position and size options are enabled only in PIP mode. Setting Description Key Lock Key input does not work. This prevents invalid key input. *This function is not supported. Product/Service Info. Displays the model name, software version, serial number, IP address, MAC address and home page. Portrait Mode Rotate OSD clockwise (90°,270°) Option 90° Rotate OSD clockwise 90°. 270° Rotate OSD clockwise 270°. MoveOKAUDIOClear Voice II Balance Sound Mode Digital Audio OutSpeaker 270° MoveOKAUDIOClear Voice II Balance Sound Mode Digital Audio OutSpeaker 90° Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. Tile Mode - Natural Mode When active, the part of the image that would normally be displayed in the gap between the monitors is omitted. 1X2 When using 2 monitors Off When the Tile Mode option is disabled Before ID 2 ID 1 Tile ID 3X3 When using 9 monitors 2X2 When using 4 monitors ID 3 ID 2 I...