Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
LCD MONITOR MODEL IPS225V IPS235V ENGENGLISH ENGENGLISH TABLE OF CONTENTS 2 Contents 3 AsseMBLInG AnD PRePAR- InG 3 Unpacking 4 Parts and buttons 6 Setting up the Monitor set 6 -Attaching the Stand Base 6 -Detaching the Stand Base 7 -Mounting on a table 8 -Mounting on a wall 10 UsInG tHe MonItoR set 19 DUAL PACKAGE Setting 20 tRoUBLesHootInG 22 sPeCIFICAtIons 22 IPS225V 23 IPS235V 24 Preset Modes (Resolution) 24 Indicator 10 Connecting to a PC 10 -D-SUB connection 10 -DVI-D connection 10 -HDMI connection 12 CUstoMIZInG settInGs 12 Accessing The Main Menus 13 Customizing Settings 13 -Menu Settings 14 -PICTURE 15 -COLOR 16 -DISPLAY 16 -VOLUME 17 -OTHERS 18 MODE Setting ASSEMBLING AND PREPARING 3 AsseMBLInG AnD PRePARInG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. stand Base Power CordCD(owner's Manual) / Card D-sUB Cable (This signal cable may be attached to this product before shipping out.) DVI-D Cable (This cable is not included in all countries.) Display Quality Assurance Report CAUtIon y Do not use any unapproved accessories to ensure the safety and product life span. y Any damages or injuries by using unapproved accessories are not covered by the warranty. note y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. y User should use shielded signal interface cables (D-SUB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product. ENGENGLISH ASSEMBLING AND PREPARING 4 Parts and buttons ENGENGLISH Power Indicator yLighting on: turned on yLighting off: turned off Connection panel (See p.10) Button (See p.13) (Power Button) ASSEMBLING AND PREPARING 5 Button Description MENU Accesses the main menus.(See p.13) osD LoCKeD/ UnLoCKeD This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. MODE Use this button to enter USER, MOVIE,TEXT,PHOTO,sRGB menus.(See p.18) DUAL Use this button to enter DUAL MONITOR and DUAL WEB menus.(See p.19) AUTO When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) the best display mode 1920 x 1080 INPUT You can choose the input signal. • When two input signals are connected, you can select the input signal (D-SUB/DVI/ HDMI) you want. • When only one signal is connected, it is automatically detected. The default setting is D-SUB. EXIT Exit the OSD(On Screen Display). (Power Button) Turns the power on or off. Power Indicator The power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks blue. ENGENGLISH ENGENGLISH ENGENGLISH ASSEMBLING AND PREPARING 6 setting up the Monitor set Attaching the stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. CAUtIon Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 Attach the stand Base and then tighten the screw to the right with a Coin. stand Base Detaching the stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 Turn the screw to the left with a Coin, and then pull out the stand Base from the stand Body. stand Base CAUtIon y This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. y Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. ASSEMBLING AND PREPARING 7 Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 2 Connect the Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. ENGENGLISHWhen you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. wARnInG Tilt from +15 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. note Front Rear 15- 5 Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUtIon ENGENGLISH ENGENGLISH ASSEMBLING AND PREPARING 8 Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of...
Dieses Handbuch ist für folgende Modelle:Monitore - IPS235V-BN (1.18 mb)