Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: LG Dateigröße: 8.59 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Monitore - 22EN43VQ (9.23 mb)

LED LCD MONITOR MODEL 22EN43VQ 23EN43VQ 24EN43VQ 27EN43VQ ENGENGLISH ENGENGLISH TABLE OF CONTENTS 2 Contents 3 AsseMBLInG AnD PRePAR- InG 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 -Attaching the Stand Base 6 -Detaching the Stand Base 7 -Mounting on a table 7 -Using the cable holder 9 -Mounting on a wall 10 UsInG tHe MonItoR set 10 Connecting to a PC 10 -D-SUB connection 10 -DVI-D connection 10 -HDMI connection 12 CUstoMIZInG settInGs 13 Customizing Settings 13 -Menu Settings 14 -Picture 15 -Color 16 -Display 16 -Volume 17 -Others 18 MY KEY Setting 19 FUNC. Setting 19 -Picture Mode 20 -SUPER ENERGY SAVING 21 -DUAL DISPLAY 21 -DUAL WEB 22 -MY KEY Setting 23 tRoUBLesHootInG 25 sPeCIFICAtIons 25 22EN43VQ 26 23EN43VQ 27 24EN43VQ 28 27EN43VQ 29 Preset Modes (Resolution) 29 HDMI TIMING 29 Indicator 30 PRoPeR PostURe 30 Proper posture for using the Monitor set. 3 ENEGNLGISH ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. yyDo not use any unapproved accessories to ensure the safety and product life span. yyAny damages or injuries by using unapproved accessories are not covered by the warranty. yyThe accessories supplied with your product may vary depending on the model. yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION NOTE Stand Body (22EN43VQ/23EN43VQ/ 24EN43VQ) Stand Body (27EN43VQ) Two Screws (27EN43VQ) Stand Base CD(Owner's Manual) / Card D-SUB Cable DVI-D Cable (This cable is not included in all countries.) ( Depending on the country ) ( Depending on the country ) Power Cord AC-DC Adapter AC-DC Adapter or EEENNNGGGGLLIISSHH ASSEMBLING AND PREPARING 4 Parts and buttons Power Indicator y Lighting on: turned on y Lighting off: turned off (Power Button) Button (See p.12) Connection panel (See p.10) 5 ENEGNLGISH ASSEMBLING AND PREPARING Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. CAUTION 2 Stand Base Stand Body Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. 1 2 3 22EN43VQ/23EN43VQ/24EN43VQ Attach the Stand Body to the monitor set. Use two screws to fix the Stand Body and monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Stand Base Stand Body Stand Body 1 2 3 4 27EN43VQ 6 ENEGNLGISH ASSEMBLING AND PREPARING Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Stand Base Stand Base Stand Body Stand Body Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. 1 2 3 2 27EN43VQ Turn the screw to the left with a coin. Pull out the Stand Base from the Stand Body. Remove two screws and pull out the Stand Body from the monitor set. 1 2 3 Stand Base Stand Body Stand Body yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. CAUTION 22EN43VQ/23EN43VQ/24EN43VQ 7 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. 3 Press (Power) button on the bottom switch panel to turn the power on. 10 cm 10 cm 10 cm 10 cm Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. CAUTION or Using the cable holder Cable holder ASSEMBLING AND PREPARING 8 Using the Kensington security system ENGENGLISHWhen you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. wARnInG Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. note Front Rear The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit Connect the Kensington security system cable between the Monitor set and a table. The Kensington security system is optional. You can obtain it from most electronics stores. note Mounting on a wall For proper v...

Herunterladen

Geben Sie zwei Ziffern: