Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
There are the types of bright dot defects: One lit red, green or blue sub pixel Two adjacent lit sub pixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) Three adjacent lit sub pixels (one white pixel) A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects: One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. BRIGHT DOT DEFECTS ACCEPTABLE LEVEL ACCEPTABLE LEVEL MODEL 170C6 190C6 1 lit subpixel 4 or fewer 3 or fewer 2 adjacent lit subpixels 2 or fewer 1 or fewer 3 adjacent lit subpixels (one white pixel) 0 0 Distance between two bright dot defects* 15 mm or more 25 mm or more Total bright dot defects of all types 4 or fewer 3 or fewer BLACK DOT DEFECTS ACCEPTABLE LEVEL ACCEPTABLE LEVEL MODEL 170C6 190C6 1 dark subpixel 4 or fewer 5 or fewer 2 adjacent dark subpixels 2 or fewer 2 or fewer 3 adjacent dark subpixels 0 0 Distance between two black dot defects* 15 mm or more 15 mm or more Total black dot defects of all types 4 or fewer 5 or fewer TOTAL DOT DEFECTS ACCEPTABLE LEVEL ACCEPTABLE LEVEL MODEL 170C6 190C6 Total bright or black dot defects of all types 5 or fewer 5 or fewer Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect All Philips monitors are ISO13406-2 Compliant RETURN TO TOP OF THE PAGE • Front View Product Description • Accessory Pack • Connecting to Your PC • Getting Started • Optimizing Performance • The Base Connecting to Your PC Accessory Pack Unpack all the parts. Item Description 1) Power Cable (socket may differ for different countries) 2) Macintosh Adapter (optional) 3) VGA Signal Cable 4) E-DFU package with Quick Setup Guide and CD-ROM. RETURN TO TOP OF THE PAGE Connecting to Your PC 1) Plug the power cord into monitor firmly. 2) Clip the power cord and signal cable together for cable management. Note: If you use an Apple Macintosh, you need to connect the special Mac adapter to one end of the monitor signal cable. 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. RETURN TO TOP OF THE PAGE • Front View Product Description • Accessory Pack • Connecting to your PC • Getting Started • Optimizing Performance • Unfold the Base • Fold the Base The Base Unfold and Fold the Base Unfold the Base 1) Put monitor face down on the safe surface. 2) Pull up the base. Fold the Base 1) Push down the head of monitor. RETURN TO TOP OF THE PAGE Your LCD Monitor : • Front View Product Description • Connecting to Your PC • Getting Started • Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/XP and the Plug & Play application can be activated. The installation procedure based on Windows® '95 OEM Release 2 , 98 , Me, XP and 2000 is specified as follows. For Windows® 95 1. Start Windows® '95. 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, point to 'Change...' then click on 'Have Disk...'. 6. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 7. Click on the 'OK' button then select your monitor model and click on 'OK'. 8. Click on the 'Close' button. For Windows® 98 1. Start Windows® 98. 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, point to 'Change...' then click on 'Next' 6. Select 'Display a list of all the drivers in a specific location, so you ...