Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Monitore - 220P1ES/00 (1.83 mb)
Monitore - 220P1ES/00 (1.53 mb)
Monitore - 220P1ES/00 (1.45 mb)
Monitore - 220P1ES/00 (1.36 mb)
Anleitung Zusammenfassung
.. (b) Connect the monitor signal cable to the video connector on the back of your computer. .. (c) Connect the PC audio cable..to the audio connector on the back of your computer. .. (d) Connect the USB upstream port on the monitor and the USB port on PC with a USB cable. The USB downstream port is now ready for any USB device to plug in. .. (e) Plug the power cord of your computer and your monitor into a nearby outlet. .. (f) Turn on your computer and monitor. If the monitor displays an image, installation is complete. .. RETURN TO TOP OF THE PAGE.. .. .. .. .. .. .. .... .. .. .. .. .. .. .. .. • Install base stand • Remove base stand .. • Front View Product Description .. • Accessory Pack .. • Connecting to your PC .. • Getting Started .. • Optimizing Performance .. • Remove the Base .. .. .. .. .. .. .. .. .. .. .. .. .. .. The Base Install base stand 220B1 (a) Place the monitor base stand on a stable surface. (b) Firmly grasp the monitor with both hands. (c) Attach the monitor stand to the monitor column until the tabs "click" into place before releasing the height adjustable column. .. Remove base stand 220B1 Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury... a) Extend the monitor stand to its maximum height... (b) Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen. Then lift the monitor stand... (c) Press the release button on the rear of the stand to remove the base from the stand. .. Remove the Base Condition: ............for VESA standard mounting applications (a) Remove the 4 screw covers. 220P1 220B1 .. .. .. .. .. .. .. .. (b) Remove the 4 screws and then remove the base from the LCD monitor. 220P1 220B1 Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface. .. RETURN TO TOP OF THE PAGE.. .. .. .. .. .. .. .. .. .... .. .. .. .. .. .. .. .. .. Your LCD Monitor : .. . Front View Product Description .. . Setting Up and Connecting Your Monitor .. . Getting Started .. . Optimizing Performance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Getting Started Getting Started Use the information file ( .inf) for Windows® 2000/XP/Vista or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 2000/XP/Vista. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 2000/XP/Vista and the Plug & Play application can be activated. The installation procedure based on Windows® 2000 , XP and Vista is specified as follows. For Windows® 2000 ........Start Windows® 2000 ........Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. ........Double click on the 'Display' Icon. ........Select the 'Settings' tab then click on 'Advanced...'. ........Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. ........Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button. ........Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'. ........Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive). ........Click on the 'Open' button, then click on the 'OK' button. ..........Select your monitor model and click on the 'Next' button. ..........Click on the 'Finish' button then the 'Close' button. If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button. For Windows® XP ........Start Windows® XP ........Click on the 'Start' button and then click on 'Control Panel'. ........Select and click on the category 'Printers and Other Hardware' ........Click on the 'Display' Item. ........Select the 'Settings' tab then click on the 'Advanced' button. ........Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. .. .. .. .. .. .. .. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below. ........Click on the 'Driver' tab and then click on 'Update Driver...' button. ........Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. ........Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. ..........Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD-ROM Drive). ..........Click on the 'Open' button, then click the 'OK' button. ..........Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed Windows® Logo testing to verify its compatibili...
Dieses Handbuch ist für folgende Modelle:Monitore - 220P1EB/27 (1.83 mb)
Monitore - 220B1CB/27 (1.83 mb)
Monitore - 220B1CB/00 (1.83 mb)
Monitore - 220B1CS/00 (1.83 mb)