Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
In other cases, set Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal. When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC. When an AV device is connected, set Edit Name to DVI Device to enjoy the video and audio from the connected AV device. Source AutoSwitch Settings PACHMT Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. [^3 Note • If the display TV source is active (TV tuner connected to the display) the Source AutoSwitch search function becomes inactive. The display will remain in the TV source. • Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is set to On, the PIP function will not work, the Source AutoSwitch selection must be set to Off, for the PIP feature to work. • When the Source AutoSwitch selection is On, and or the Primary Source Recovery is On, the display power saving mode becomes inactive. • When Primary Source Recovery is On, only the Primary Source and Secondary Source selection are available and they are interchangeable and selectable at will. Refer to PIP > Source for compatible signals for each primary input source. Adjusting the LCD Display Source AutoSwitch ^urceAuroLv/iich Í-É!¡™= Source AutoSwitch Primary Source Recovery Primary Source : Secondary Source : О Return When the Source AutoSwitch is On, the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary source selection will become active, if no primary video source is available. If the primary or secondary source is not recognized, the display will search again, if no active video is found the display will show the no-input-signal message. When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking for an active video source, returning back to the first video source in the sequence if no video is found. 1. Off 2. On Primary Source Recovery buurca Ârno-JiïïcTTïmim Source AutoSwitch Primary Source Recovery Primary Source : Secondary Source : О Return When Primary Source Recovery is On, only the Primary Source and Secondary Source video source selection will be searched for active video. The Primary Source will be selected if active video is found, if no video is found, the Secondary Source will be selected, if no video is found in Secondary Source again, the no-input-signal is displayed. 1. Off 2. On Primary Source ,cj.jrra Source AutoSwitch Primary Source Recovery Primary Source : ^ Secondary Source : Adjusting the LCD Display Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source for the automatic input source. Picture [PC / DVI / DisplayPort / MagicInfo Mode] • If connected to a PC, set Edit Name to DVI PC, and enjoy video or audio content saved on the PC. • If connected to an AV device, set Edit Name to DVI Device, and enjoy video or audio content saved on the AV device. Available Modes • □ PC / DVI / DisplayPort • E AV • E Component • HDMI • m MagicInfo • □ IV I Note To watch TV on the product, connect a TV tuner box (sold separately). (For South Korea and the United States only.) ®Note Using MagicInfo • To use MagicInfo with an MXn-3, MPn-3 model, connect the MagicInfo output on the already included network box to [HDMI IN 2 (MAGICINFO)] on the product. • To use MagicInfo with an MX-3, MP-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. Adjusting the LCD Display Mode Mode Information Custom Color Tone Advertisement \ £ UK Color Temp. Image Lock Auto Adjustment ▼ More c' I Note Not available when Dynamic Contrast is set to On. 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3. Custom Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. (0Note • By adjusting the picture using the Custom function, Mode will change to Custom mode. • Not available when Dynamic Contrast is set to On. 1. Contrast Adjusts the Contrast. 2. Brightness Adjusts the Brightness. 3. Sharpness Adjusts the Sharpness. 4. Gamma Adjusting the LCD Display Adjust the mid-range brightness (Gamma) for the picture. • Natural • Mode 1 Sets the picture brighter than Natural. • Mode 2 Sets the picture darker than Mode 1. • Mode 3 Increases the contrast between dark and bright colors. Not availabl...
Dieses Handbuch ist für folgende Modelle:Monitore - 320MX-3 (4.23 mb)
Monitore - 320MP-3 (4.23 mb)