Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Set the color setting higher than 24 bits (true color). Important Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. Display image is incorrect . The screen color is mono or abnormal. . The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. •Make sure the video card is properly inserted in the slot. •Set the color setting higher than 24 bits (true color) at Control Panel -Settings . • Check if the screen is set to interlace mode and if yes,change it to the recommend resolution. Troubleshooting Display image is incorrect . The screen color is mono or abnormal. . The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. •Make sure the video card is properly inserted in the slot. •Set the color setting higher than 24 bits (true color) at Control Panel -Settings . • Check if the screen is set to interlace mode and if yes,change it to the recommend resolution. Troubleshooting Have you installed the display driver? . Have you installed the display driver? . Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette)that comes with your display.Or,you can also download the driver from our web site:• Make sure to check if the video card supports Plug&Play function. A22 Specifications W1954TQ Display 19 inches (48.1 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 48.1 cm 0.284*0.284 mm pixel pitch Sync Input Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Video Input Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Analog : VESA 1440 x 900 @75 Hz Digital : VESA 1440 x 900 @60 Hz Recommend VESA 1440 x 900 @60 Hz Plug&Play DDC 2B (Digital), DDC 2AB (Analog) Power On Mode : 36 W(Typ.) Consumption Sleep Mode . 1 W Off Mode . 1 W Dimensions With Stand Without Stand &Weight Width 45.05 cm / 17.73 inches 45.05 cm / 17.73 inches Height 38.09 cm / 14.99 inches 32.67 cm / 12.86 inches Depth 18.30 cm / 7.20 inches 6.00 cm / 2.36 inches Net 3.33 kg (7.34 lbs) Tilt Range Tilt -5°~15° Power Input AC 100-240V~ 50/60Hz 0.8A Environmental Operating ConditionsConditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. A23 Specifications W2254TQ Display 22 inches (55.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 55.8 cm 0.282*0.282 mm pixel pitch Sync Input Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital (HDCP) Video Input Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Analog : VESA 1680 x 1050 @60 Hz Digital : VESA 1680 x 1050 @60 Hz Recommend VESA 1680 x 1050 @60 Hz Plug&Play DDC 2B (Digital), DDC 2AB (Analog) Power On Mode : 40 W(Typ.) Consumption Sleep Mode . 1 W Off Mode . 1 W Dimensions With Stand &Weight Width 51.78 cm / 20.38 inches Height 42.41 cm / 16.69 inches Depth 19.80 cm / 7.79 inches Without Stand 51.78 cm / 20.38 inches 36.93 cm / 14.53 inches 6.30 cm / 2.48 inches Net 4.16 kg (9.17 lbs) Tilt Range Tilt -5°~15° Power Input AC 100-240V~ 50/60Hz 1.0A Environmental Operating ConditionsConditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. A24 Specifications Preset Modes (Resolution) W1954TQ Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 640 x 350 31.469 70 2 720 x 400 31.468 70 3 640 x 480 31.469 60 4 640 x 480 37.500 75 5 800 x 600 37.879 60 6 800 x 600 46.875 75 7 832 x 624 49.725 75 8 1024 x 768 48.363 60 9 1024 x 768 60.123 75 10 1152 x 870 68.681 75 11 1152 x 90...
Dieses Handbuch ist für folgende Modelle:Monitore - 568581 (1.52 mb)
Monitore - W1954TQ-PF (1.52 mb)