Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Warranty void if removed.Important WARRANTY VOID IF REMOVED 3850TAZ209Y To enjoy clearer and more vivid stereoscopic images See if the resolution is set to Full HD. The recommended resolution for 3D images is 1920X1080. If a viewer moves left or right with a distance of more than 4 m, the screen might look dimmed. Keep a distance of more than 4 m from the product. 4 m * When used for other than the 3D video, the screen may be haunted. Installing the 3D Player /To enjoy the 3D video (To view the applicable Guide, click here.) WARNING -This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 1 Using the Remote Control 1 2 3 4 5 6 7 8 0 9 CTR. PWR * There is not a function which is supported There is not a function which is supported • Menu Button • Check Button • Volume Button • Mute button Name of the Remote Control Buttons There is not a function which is supported • UP and Down buttons Bring up and down direction adjustment. • ARC button To select the image size of the screen. • Auto Button Automatic adjustment function (Operational for the analog signal only) • Exit Button There is not a function which is supported There is not a function which is supported • CTR.PWR Button Turn on the power of the PC built in the monitor and then turn off. (The CTR.PWR function operates only when the PC Control menu is off.) • Power On/Off Button • Input Select Button (See next page) 2 Using the Remote Control 1 2 3 4 5 6 7 8 0 9 CTR. PWR * If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. • Input Select Button RGB DVI INPUT 3 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cap. • Dispose of used batteries in the recycle bin to prevent environmental pollution. Inserting batteries into remote control. AAA Type Name and Function of the Parts * The product image in the user’s guide could be different from the actual image. Rear View OUT IN RGB IN RGB OUT DVI IN REMOTE CONTROL IN RS-232C (CONTROL& SERVICE) AUDIO (RGB/DVI) LAN RGB OUT SERLAL PORT USBH/PHONE OUT SP/DIF OUT IN Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports (IN, OUT) RGB, DVI Ports (IN, OUT) PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. LAN Ports RGB out Ports Head Phone out Port Optical Sound out Ports USB Ports Serial Ports *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual). 4 Connecting to External Devices When Connecting to your Built in PC When connecting with the DVI signal input OUT IN RGB IN RGB OUT DVI INREMOTE CONTROL IN RS-232C (CONTROL& SERVICE) AUDIO (RGB/DVI) LAN RGB OUT SERLAL PORT USBH/PHONE OUT SP/DIF Rear side of the product. Connect the power cord. 1. 2. Turn on power by pressing the power button on the product. ON/OFFAUTO/SETSOURCE Power button 3.Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the SOURCE button at the back side of the product. SOURCE AUTO/SET • Select DVI : DVI Digital signal. RGB DVI INPUT 4. Install the driver files contained at the supplied CD. 55 Connecting to External Devices When connecting with the D-Sub signal input cable. 1. Install the Video driver file contained at the supplied CD. 2. OUT IN RGB IN RGB OUT DVI IN REMOTE CONTROL IN RS-232C (CONTROL& SERVICE) AUDIO VI) LAN RGB OUT SERLAL PORT USBH/PHONE OUT SP/DIF RGB IN RGB OUT Rear side of the product. Connect the power cord. * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. 3. Turn on power by pressing the power button on the product. ON/OFFAUTO/SET SOURCE 6 Power button Connecting to External Devices 4. 1 2 1 2 Move the mouse pointer to an empty area on the Windows screen (with no icons or task bars) and click the right mouse button. When the pop-up menu appears, click the 'Properties' menu. 7 1 2 5. Select 'Settings' tab. Click 'Advanced' button. Connecting to External Devices 6. 1 2 Select 'CATALYST(R)Control Center' tab. Click 'ATI CATALYST(R)Control Center' button. 7. Select 'Display Manager'menu. Select 'Detect Displays'button. 1 2 8 Connecting to External Devices 1 2 8. Select gray monitor icon and then press the right button of the mouse.1 2 S...