Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: LG Dateigröße: 1.49 mb Dateiname: Unterrichtssprache:

To adjust position of the OSD window on the screen. If the output of the video card is different from the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. To select the image size of the screen. WIDE 4:3 * 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.) Resolution Screen ratio 1280x1024 5 : 4 1152x864 4 : 3 1024x768 4 : 3 800x600 4 : 3 640x480 4 : 3 720x480 3 : 2 . The input signal which the 4:3 IN WIDE does not support the '4:3' is the following. -The 22 inch monitor is 720x400,1280x768,1360x768,1680x1050 FACTORY Restore all factory default settings except RESET "LANGUAGE." Press the -button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal. A14 On Screen Display(OSD) Selection and Adjustment Icons Menu Name Sub-menu Name When you execute F-ENGINE, two tones will appear on the screen as shown. The applied screen will appear on the left side, whereas the non-applied screen will appear on the right side.Touch the SET button to use the adjusted screen. FLATRON F-ENGINE Screen when applied Screen when not applied The OSD screen will appear when you touch the button on the left side of the monitor. TEXT: For text images (Word processing etc.) MOVIE: For animation images in videos or movies This feature lets you easily select the best desired image condition optimized to the environment (ambient illumination, image types etc). User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment. Main menu Sub menu Description MOVIE TEXT MENU : Exit -, +: Move SET : Select To adjust the USER sub-menu function, Press the SET Button USER ... (Brightness): Adjusts screen brightness. ...ACE(Adaptive Clarity Enhancer): Selects the clarity mode. ...RCM(Real Color Management): Selects the color mode. Not applied Green enhance Flesh tone Color Enhance 0 1 2 3 Select the SAVE sub-menu using the SET button MENU : Exit -: Decrease and save the YES value using the buttons. + : Increase SET : Select another sub-menu NORMAL This is under normal operating conditions. A15 Troubleshooting Check the following before calling for service. No image appears . Is the power cord of the display connected? . Is the power indicator light on? . Is the power on and the power indicator blue or green? . Is the power indicator amber? . Do you see an "OUT OF RANGE" message on the screen? . Do you see a "CHECK SIGNAL CABLE" message on the screen? • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • Adjust the brightness and the contrast. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen? . Do you see “OSD LOCKED” when you push MENU button? • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. A16 Troubleshooting Display image is incorrect . Display Position is incorrect. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. . On the screen background, vertical bars or stripes are visible. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. . Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the...

Herunterladen

Geben Sie zwei Ziffern: