Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. A16 Troubleshooting Display image is incorrect . Display Position is incorrect. . On the screen background, vertical bars or stripes are visible. . Any horizontal noise appearing in any image or characters are not clearly portrayed. . The screen color is mono or abnormal. . The screen blinks. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. • Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. A17 Troubleshooting Have you installed the display driver? .... Have you installed the display driver? .... Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? .. Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: .. Make sure to check if the video card supports Plug&Play function. Specifications 17inch Display 17 inches (43.27cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264mm pixel pitch Sync Input Horizontal Freq. Vertical Freq. Input Form 30 - 83kHz (Analog) 30 - 71kHz (Digital) 56 - 75Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input Signal Input 15 pin D-Sub Connector DVI - D connector Input Form RGB Analog (0.7Vp-p/75ohm), Digital Resolution Max DVI Digital: VESA 1280 x 1024@60Hz D-sub Analog: VESA 1280 x 1024@75Hz Recommend VESA 1280 x 1024@60Hz Plug&Play DDC 2B Power On Mode : 35W Consumption Sleep Mode . 1W Off Mode . 1W Full Up Position Dimensions &Weight (with tilt stand) Width 36.95 cm / 14.55inches Height 37.74 cm / 14.86 inches Depth 23.65 cm / 9.31 inches Net 4.3 kg (9.48 lbs) Til tRange Tilt 0°~30° 3A Power Input 12V Folded Position 36.95cm / 14.55 inches 31.47cm / 12.39 inches 5.79 cm / 2.28inches DVE. DSA-0421S-12 1 AC/DC Adapter Operating Conditions Environmental Temperature 10°C to 35 °C Conditions Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Tilt Stand Attached( O ), Detachable ( ) Power cord Wall-outlet type or PC-outlet type A18 NOTE Information in this document is subject to change without notice. Specifications Display Display 19inch 19 inches (48.19cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294mm pixel pitch Sync Input Horizontal Freq. 30 - 83kHz (Analog) 30 - 71kHz (Digital) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Video Input Signal Input 15 pin D-Sub Connector DVI - D connector Input Form RGB Analog (0.7Vp-p/75ohm), Digital Resolution Max DVI Digital: VESA 1280 x 1024@60Hz D-sub Analog: VESA 1280 x 1024@75Hz Recommend VESA 1280 x 1024@60Hz Plug&Play DDC 2B Power On Mode : 39W Consumption Sleep Mode . 1W Off Mode . 1W Full Up Position Dimensions &Weight (with tilt stand) Width 41.23 cm / 16.23inches Height 41.4 cm / 16.29 inches Depth 23.65 cm / 9.31 inches Folded Position 41.23 cm / 16.23inches 34.52cm / 13.59 inches 6.3 cm / 2.48inches Net 5.4 kg (11.91 lbs) Til tRange Tilt 0°~30° 3A DVE. DSA-0421S-12 1 Power Input 12V AC/DC Adapter Operating Conditions Environmental Temperature 10°C to 35 °C Conditions Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Tilt Stand Attached( O ), Detachable ( ) Power cord Wall-outlet type or PC-outlet type A19 NOTE Information in th...
Dieses Handbuch ist für folgende Modelle:Monitore - L1770HR-BF (1.45 mb)
Monitore - L1770HR-WF (1.45 mb)