Stimmen - 5, Durchschnittliche Bewertung: 3.6 ( )

Hersteller: LG Dateigröße: 2.48 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  LG  L1942SE

In this case, please ask to the computer or the video card manufacturer. A18 Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. Display image is incorrect The screen color is mono or abnormal. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Have you installed the display driver? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. A19 Specifications 17 inch Display 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 43.2 cm 0.264 mm pixel pitch Sync Input Horizontal Freq. Vertical Freq. 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Input Form Separate TTL SOG (Sync On Green) Video Input Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max Recommend VEVESA 1280 x 1024 @75 Hz SA 1280 x 1024 @60 Hz Plug&Play DDC 2B Power 0n Mode : 20 W(Typ.) Consumption Sleep Mode . 0.3 W Off Mode . 0.3 W Dimensions With Stand &Weight Width 36.96 cm / 14.55 inches Height 39.13 cm / 15.41 inches Depth 18.48 cm / 7.28 inches Without Stand 36.96 cm / 14.55 inches 31.51 cm / 12.41 inches 6.05 cm / 2.38 inches Net 3.0 kg ( 6.62 lbs) Tilt Range Tilt -5°~20° Power Input AC 100-240V~ 50/60Hz 0.8A Environmental Operating ConditionsConditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A20 Specifications 19 inch Display 19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 48.2 cm 0.294 mm pixel pitch Sync Input Horizontal Freq. Vertical Freq. 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Input Form Separate TTL SOG (Sync On Green) Video Input Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz Plug&Play DDC 2B Power 0n Mode : 22 W(Typ.) Consumption Sleep Mode . 0.3 W Off Mode . 0.3 W Without Stand Dimensions With Stand &Weight Width 40.63 cm / 16.00 inches 40.63 cm / 16.00 inches Height 41.97 cm / 16.52 inches 34.45 cm / 13.56 inches Depth 18.48 cm / 7.28 inches 5.99 cm / 2.36 inches Net 3.45 kg (7.61 lbs) Tilt Range Tilt -5°~20° Power Input AC 100-240V~ 50/60Hz 0.8A Environmental Operating ConditionsConditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A21 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 640 x 350 31.469 70 2 720 x 400 31.468 70 3 640 x 480 31.469 60 4 640 x 480 37.500 75 5 800 x 600 37.879 60 6 800 x 600 46.875 75 7 832 x 624 49.725 75 8 1024 x 768 48.363 60 9 1024 x 768 60.123 75 10 1152 x 870 68.681 75 11 1152 x 900 61.805 65 *12 1280 x 1024 63.981 60 13 1280 x 1024 79.976 75 * Recommend Mode Indicator LED ColorMODE On Mode blue Sleep Mode flicker Off Mode Off A22 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Separate the stand by pushing the PUSH button. 3. Install the Wall mount plate. Good Position Bad Position Warning: You can hurt your finger. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable...

Herunterladen

Geben Sie zwei Ziffern: