Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Configure by directly adjusting Forte Manager Program --> Picture--> Position if adjusted condition is dissatisfactory Press Forte Manager Program --> Picture --> Tracking-->Auto Setup to adjust screen automatically to the optimal condition, which fits to the current mode. Remove vertical lines by adjusting Forte Manager Program --> Picture --> Tracking -->Clock, if adjusted condition is dissatisfactory. Press Forte Manager Program --> Picture --> Resolution --> Preferred to adjust screen automatically to the optimal condition, which fits to the current mode. Adjust by selecting Forte Manager Program --> Picture --> Tracking --> Phase if adjusted condition is dissatisfactory. • Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel --> Settings. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. The screen color is mono or abnormal. The screen blinks. Press Forte Manager Program --> Picture --> Tracking-->Auto Setup to adjust screen automatically to the optimal condition, which fits to the current mode. Configure by directly adjusting Forte Manager Program --> Picture--> Position if adjusted condition is dissatisfactory Press Forte Manager Program --> Picture --> Tracking-->Auto Setup to adjust screen automatically to the optimal condition, which fits to the current mode. Remove vertical lines by adjusting Forte Manager Program --> Picture --> Tracking -->Clock, if adjusted condition is dissatisfactory. Press Forte Manager Program --> Picture --> Resolution --> Preferred to adjust screen automatically to the optimal condition, which fits to the current mode. Adjust by selecting Forte Manager Program --> Picture --> Tracking --> Phase if adjusted condition is dissatisfactory. • Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel --> Settings. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Troubleshooting Have you installed the display driver? Have you installed the display driver? Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: Make sure to check if the video card supports Plug&Play function. A12 Specifications Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight (with tilt stand) Til tRange Power Input AC/DC Adapter Environmental Conditions Tilt Stand Signal cable Power cord 19 inches (48.19cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294mm pixel pitch Horizontal Freq. 30 - 83kHz (Analog) 30 - 71kHz (Digital) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Digital Signal Input DVI - Analog connector DVI - Digital connector Input Form RGB Analog (0.7Vp-p/75ohm), Digital Max DVI Digital: VESA 1280 x 1024@60Hz D-sub Analog: VESA 1280 x 1024@75Hz Recommend VESA 1280 x 1024@60Hz DDC 2B On Mode : 39W Sleep Mode . 2W Off Mode . 1W Width 41.65 cm / 16.39inches Height 42.89 cm / 16.88 inches [L1900E] 43.20 cm / 17.00 inches [L1900R], [L1900J] Depth 14.45 cm / 5.68 inches [L1900E] 14.84 cm / 5.84 inches [L1900R] 11.34 cm / 4.65 inches [L1900J] Net 5.8 kg (12.79 lbs) [L1900E] 6.8 kg (14.99 lbs) [L1900R] 5.54 kg (12.21 lbs) [L1900J] Tilt 0°~20° 12V 3.0A DVE. DSA-0421S-12 1 42 or Lien Chang, LCAP07F Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached( O ), Detachable ( ) Attached( ), Detachable ( O ) Wall-outlet typ...
Dieses Handbuch ist für folgende Modelle:Monitore - L1900E-BF (412.35 kb)
Monitore - L1900J-BF (412.35 kb)