Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung LG, modell E2360V

Hersteller: LG
Dateigröße: 1.44 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Dieses Gerät hat auch andere Anweisungen:

Monitore - E2360V (1.46 mb)

Monitore - E2360V (1.95 mb)

Monitore - E2360V (1.47 mb)

Monitore - E2360V (1.47 mb)

If any items are missing, contact your dealer. Owner's Manual/Cards 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attached to this product before shipping out.) Power Cord AC-DC adapter (Depending on the country) DVI-D Signal Cable (This feature is not available in all countries.) NOTE ■ This accessories may look different from those shown here. ■ User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores to maintain standard compliance for the product. Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor face down on the cushion or soft cloth. 2. Assemble the Stand Base into the Stand Body in the correct direction as shown in the picture. Stand Body Stand Base 3. Attach the monitor to the Stand Base by turning the screw to the right. Screw : Turn the screw by using the screw handle. 4. Once assembled take the monitor up carefully and face the front side. « Connecting the Display ■ Turn the screw to the left to separate the stand body from the stand base. IMPORTANT ■ This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. ■ Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display Adjust the position of the panel in various ways for maximum comfort. ■ Tilt Range : -5° to 15° -5 15 L IMPORTANT ■ It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. ■ When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). Connecting the Display E1960S/E2060S/E2260S/E2360S Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable 1 and power cord in order, then tighten the screw of the signal cable. A Connect D-sub(Analog signal) Cable NOTE ■ This is a simplified representation of the rear view. ■ This rear view represents a general model; your display may differ from the view as shown. Varies according to model. Wall-outlet type ,* T, ^1-Г 0 -IE« Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. When using a D-Sub signal input cable connector for Macintosh ЖЩ MAC Mac adapter : For Apple Macintosh use, a separate plug adapter Is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15pin 2 row connector. 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. PROCESSING SELF NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. « Connecting the Display E1960T/E2060T/E2260T/E2360T Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 2. Connect signal input cable 1 and power cord 2 in order, then tighten the screw of the signal cable. № Connect DVI-D(Digital signal) Cable [b Connect D-sub(Analog signal) Cable NOTE ■ This is a simplified representation of the rear view. ■ This rear view represents a general model; your display may differ from the view as shown. Varies according to model. Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. When using a D-Sub signal input cable connector for Macintosh vŒffl MAC Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15pin 2 row connector. ■jJIWpc ] ^ PC DVI-D (This feature is not available in all countries.) 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) PROCESSING SELF IMAGE SETTING NOTE ‘ Self Image Setting Function’? This function provides the user with optimal disp...