Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
(Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E1940T : 1360x768 E2040T : 1600 x 900 E2240T/E2340T : 1920 x1080 PROCESSING AUTO IMAGE ADJUSTMENT INPUT Button When two input signals are connected, you can select the (SOURCE Hot key) input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. © EXIT Button Exit the OSD(On Screen Display). © Power Button & Use this button to turn the display on or off. Power Indicator .................................................................................. The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white. Control Panel Functions E1940S/E2040S/E2240S/E2340S Front Panel Controls MONITOR SETUP □□ m MENU MODE AUTO EXIT O MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. © MODE Button Use this button to enter F-ENGINE, ORIGINAL RATIO, PHOTO EFFECT menus. For more information, refer to page 21. Control Panel Functions @ AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E1940S : 1360 x768 E2040S : 1600 x900 E2240S/E2340S : 1920 x1080 PROCESSING AUTO IMAGE ADJUSTMENT © EXIT Button Exit the OSD(On Screen Display). © Power Button & Use this button to turn the display on or off. Power Indicator .................................................................................. The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), the power indicator is blinking white. On Screen Display (OSD) Control Adjustment E1940T/E2040T/E2240T/E2340T Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: f MONITOR SETUP MBIU MODE AUTO M=UT EXIT Press the discretionary Button, then the main menu of the OSD appears. To access a control, use the corresponding Buttons. Use the / Buttons to adjust the image to the desired level. Use the Button to select other sub-menu items. Press the EXIT Button to ...
Dieses Handbuch ist für folgende Modelle:Monitore - E1940S (5.65 mb)
Monitore - E1940S-PN (5.65 mb)
Monitore - E1940T (5.65 mb)
Monitore - E1940T-PN (5.65 mb)