Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Samsung Dateigröße: 1.5 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Samsung  BX2450

Dieses Gerät hat auch andere Anweisungen:

Monitore - BX2450 (1.06 mb)

Monitore - BX2450 (975.53 kb)

Monitore - BX2450 (1.08 mb)

Monitore - BX2450 (1.16 mb)

To remove MagicTune™, complete the following steps. 1. Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2. Double-click the [Add or Remove Programs] icon in the Control Panel. Installing the Software 4-2 3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted. 4. Click [Change or Remove Programs] to remove the software. 5. Select [Yes] to start removing MagicTune™. 6. Wait until a message box appears informing you that the software has been removed completely. E3 For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, please visit our website. 4-2 Installing the Software 4-3 MultiScreen What is MultiScreen ? B MuKiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. Installing the Software 1. Insert the installation CD into the CD-ROM drive. 2. Select the MultiScreen setup program. ES If the pop-up screen for the software installation does not appear on the main screen, find and double-click the MultiScreen setup file on the CD-ROM. 3. When the Installation Wizard appears, click [Next]. 4. Complete the remaining software installation steps according to the instructions displayed on the screen. 0 • The software may not work properly if you do not restart the computer after the installation. •The MultiScreen icon may not appear depending on the computer system and the product specifications. •If the shortcut icon does not appear, press the F5 key. Restrictions and Problems with the Installation (MultiScreen) The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment. Operating System OS •Windows 2000 •Windows XP Home Edition •Windows XP Professional •Windows Vista 32Bit •Windows 7 32Bit 0 For MultiScreen, the operating systems Windows 2000 or later is recommended. Hardware •At least 32MB of memory •At least 60MB of free space on the hard disk drive Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select MultiScreen from the program list and click the [Add/Delete] button. Installing the Software 4-3 5 Troubleshooting 5-1 Monitor Self-Diagnosis 0 • You can check if the product is working properly using the Self-Diagnosis function. • If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below. 1. Turn the product and the PC off. 2. Separate the signal cable from the product . 3. Turn the product on. 4. If the product is working properly, the message appears. In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product is working properly. 5-1 Troubleshooting 5-2 Before Requesting Service E3 Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. A blank screen appears / I cannot turn the product on Is the power cord connected properly? Check the connection status of the power cord. Is the message displayed on the screen? (Connected using the D-sub cable) Check the cable connecting the PC and the product. (Connected using the DVI cable) If the message appears on the screen even if the cable is properly connected, recheck the input signal by pressing the [ ©^SOURCE ] button of the product. Is the message displayed on the screen? This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product. In this case, set up the appropriate resolution and the frequency for the product. Is a blank screen displayed and does the power LED blink at a 1 second interval? 1. This occurs when the power saving function is running. If you click the mouse or press any key, the screen will be turned on. 2. This occurs when two monitors are connected, is and Magictune is running. In this case, characters on the Magictune OSD may appear corrupted. To run the Magictune, the must be set to . Please restart your PC, set the to and run the Magictune. Did you connect with a DVI cable? If you connect the DVI cable when the PC has booted up or if you reconnect the DVI cable after disconnecting the cable while using a PC, the screen may not be displayed because some graphics cards do not output the video signal. In this case, reboot the PC while the DVI cable is connected. THE IMAGE IS TOO LIGHT OR TOO DARK. Adjust the and . (Refer to the , ) The display brightness can differ according to the mode set for . If is set to <...

Herunterladen

Geben Sie zwei Ziffern: