Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
In addition, do not use the power cord of another electric appliance. • Otherwise, it may result in electric shock or fire. Connect the power plug to a wall outlet that can be easily reached. • When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product. Installation Related Warning Avoid placing burning candles, mosquito-repellent or cigarettes on the product and installing the product near a heater. • Otherwise, it may result in fire. Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet. • Otherwise, it may result in fire due to internal over-heating. Keep the plastic bags used to pack the product away from children. • If children place the plastic bags over their heads, they may suffocate. Ask an installation engineer or relevant company to install the product onto the wall. • Otherwise, it may result in injury. • Make sure to use the specified wall mount. Keep a distance of at least 10 cm from the wall when installing the product for ventilation. • Otherwise, it may result in fire due to internal over-heating. Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf. • The product may fall and this may result in damage to the product or injury. • If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire. Major Safety Precautions 1-3 Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle. • This may result in electric shock or fire. Avoid installing the product at an easily reachable height where children may reach it. • If a child touches the product, the product may fall and this may result in injury. • Since the front part is heavier, install the product on a flat and stable surface. Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fire or heater. • This may shorten the product life cycle or cause fire. Caution Do not let the product drop while moving it. • This may result in a problem with the product or injury. When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf. • Otherwise, this may cause the product to fall off and result in a malfunction or injury. • Make sure to use a cabinet or shelf suitable to the size of the product. If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter. • Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time and so on. Do not place the product face down on the floor. • This may damage the panel of the product. When putting the product down, handle it gently. • Otherwise, it may result in a problem with the product or injury. Cleaning Related Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result A in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recommended cleansing agent only. You can purchase the recommended cleansing agent from a service center. Major Safety Precautions 1-3 Before cleaning the product, unplug the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, do not spray water directly over the product parts. • Make sure that water does not enter the product. • Otherwise, it may result in fire, electric shock or a problem with the product. /$\ Caution Avoid spraying cleansing agent directly onto the product. • This may result in discoloration or cracking of the exterior of the product or the panel coming off. Use a soft, damp cloth with a "monitorexclusive cleansing agent" and wipe the product with it. • If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product. When cleaning the product, disconnect the power cord and clean the product with a soft dry cloth. • Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquito-repellent, fragrance, lubrication or cleansing agent when cleaning the product. This may result in the exterior being deformed or the print being removed. Since the exterior of the product is easily scratched, be sure to use a proper cleansing cloth. Use the cleansing cloth with a small amount of water. However, if the cloth is contaminated by alien substances, i...
Dieses Handbuch ist für folgende Modelle:Monitore - B1940ER (1.78 mb)
Monitore - B1940W (1.78 mb)
Monitore - B2240 (1.78 mb)
Monitore - B2240EMW (1.78 mb)