Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
A list of connected USB monitors is displayed. 5-3. Arrange the monitors displayed in the 'Display Properties' window in the order they are actually used. 5-4. Then click "OK" button. Configuring the USB Monitor Display Information 1.When the driver setup for the USB monitor is finished, a monitor icon is created in the system tray at the bottom of the monitor screen. 2.Click the monitor icon to display a list of connected USB monitors. Example) The following figure shows when two USB monitors are connected. 3.Select the monitor for which you want to configure the display settings. You can configure the "Screen Resolution" , "Color Quality" and "Screen Rotation" settings for your monitor. Checking the configuration After the installation, you can check the configuration by following these steps. 1.'Right-click ‘My Computer’, and select ‘Properties’ – ‘System Properties’ – the ‘Hardware tab’. 2.Click ‘Device Manager’. 3.A list of the installed device will be displayed, as shown in the figure below. The Initial Screen Settings after Installing the Program Applicable mode: Extend mode Mode position: To the right of the primary screen Mode rotation: 0° USB Monitor - Limitation Supported OS (Operating Systems) Windows XP - Service Pack 1 or earlier: Unsupported - Service Pack 2 or later: Supported Windows 2000 - Service Pack 3 or earlier: Not Supported - Service Pack 4 or later: Supported Windows Server 2003: Not Supported Windows Vista: Supported. (64bit Not Supported) * To check the information on the operating system of your PC, right-click ‘My Computer’ on the ‘Windows Desktop’ and select ‘Properties’ from the displayed menu. Check the information in the ‘General’ tab of the ‘Computer Properties’ window. 1. If you are using more than one USB monitor, first place the primary monitor in the leftmost position in the 'Display Properties - Settings' window before installing the USB monitor driver. ) is clicked, checkbox (As shown in the figure on the left, if an existing monitor ( must be checked.) Otherwise, no screen may be displayed on the existing primary monitor. . Right-click on the 'Desktop' and select 'Properties' from the displayed menu. 1. Right-click on the 'Desktop' and select 'Properties' from the displayed menu. 2. If the 'Display Properties' window is not shown on the screen, press AltSpaceM and press Space Key again. Then press the arrow keys ( or ) until the 'Display Properties' window is displayed on the other monitor. 3. Select the deactivated monitor ( ) in the 'Display Properties - Settings' window and then click to activate it. 4. 'Click 'Identify(I)' ( ) to check the monitor numbers and then rearrange them according to their actual sequence. 5. Click 'OK' ( ) to finish the setup. 2. Because this USB monitor is recognized as a USB device, the DOS screen that appears for general monitors when a PC is booting up is not displayed. -If you want to use your USB monitor as the Primary Monitor, connect a D-Sub cable (for analog signals) or a DVI cable (for digital signals) as well. 3. You cannot use the USB monitor for software using 3D hardware acceleration. -Real Player (Expansion mode is not supported.) - For most 3D games -Programs running on the base of Direct X 4. Supported movie programs - Power DVD -Win DVD(Version 5 onwards) -Windows Media Player (Version 10 or later is supported.) - VLC 5. This monitor does not support the MagicTune program. -The MagicRotation function may not function normally. -If the MagicTune program is installed on your PC, it may not be compatible with this monitor. 6. The USB monitor does not support the Auto Pivot function. 7. The USB monitor turns on automatically whenever the power cord is connected. 8. The USB monitor may not work normally with USB 1.0. 9. If you connect multiple USB monitors, a blank screen is displayed while your PC recognizes them. Screens are displayed on your USB monitors after your PC has recognized them. 10. If the graphics card of your PC does not support WDDM, the extended mode may not be available in Windows Vista. Example) Some versions of the Matrox Card Using the Stand Sliding Stand Stand Stopper Tilt angle You can adjust the tilt anlgle within a range of -3° forward to 22° backward for the most comfortable viewing angle Attaching a Base This monitor accepts a 75.0 mm x 75.0 mm VESA-compliant mounting interface pad. Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor. • For wall mounts that do not comply with VESA standard screw specifications...