Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
or N. H/V Composite, TTL, P. or N. Sync-on-green 0.3 Vp-p, N. 0.7 Vp-p @ 75 ohm, P. Power Supply AC 90-264 Volt, 60 Hz / 50Hz to 12V/3A Power Consumption Normal Power Saving 25 Watt Less than 3 W Dimensions / Unit (WxHxD) with Unit Weight / Simple base: 385.4 x 373.3 x 173 mm / 5.20Kg / 8.4Kg incl. Carton MultiMedia base: 385.4 x 406.2 x 179 mm / 5.95Kg / 9.15Kg Pivot MM base: 385.4 x 406.2 x 179 mm / 5.95Kg / 9.15Kg Angle-Pivot base: 385.4 x 431.6 x 178.9 mm / 6.6Kg / 9.8Kg Wire-frame base: 385.4 x 339.2 x 99.7 mm / 4.4Kg / 7.6Kg Carton (WxHxD): 500 x 260 x 457 mm Environmental Operating Temperature 50 °F to 104 °F (10 °C to 40 °C) Considerations Operating Humidity 10% to 80% Storage Temperature 13 °F to 113 °F (-25 °C to 45 °C) Storage Humidity 5% to 95% Audio Built-in Mic. High Sensitivity Condenser Mic. (mono) Characteristics Audio Input L/R Stereo Phone Jack, 0.5 Vrms (Available with Sound Output 1.0 W (L) + 1.0 W (R)/THD 1% at 8 ohm Multimedia Frequency Response 80 Hz - 20 KHz (at -3dB) bases only) Headphone Max 50 mW output (3.5 – pi jack) * Referring to Standard signal modes, page 26. Appendix Pin Assignments Table 8. 15 pin D-sub connector Pin Separate H/V Composite H/V Sync-on-green 1 Red Red Red 2 Green Green Green + H/V Sync 3 Blue Blue Blue 4 GND GND GND 5 GND (DDC Return) GND (DDC Return) GND (DDC Return) 6 GND-Red GND-Red GND-Red 7 GND-Green GND-Green GND-Green 8 GND-Blue GND-Blue GND-Blue 9 No Connection No Connection Not used 10 GND-Sync/Self Test GND-Sync/Self Test GND-Sync/Self Test 11 GND GND GND 12 DDC Data DDC Data DDC Data 13 Horizontal Sync H/V Sync Not used 14 Vertical Sync Not used Not used 15 DDC Data DDC Data DDC Data English 25 Appendix Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn't equal to the standard signal mode, adjust the mode with referring to the Videocard user guide because the screen might not display or only the power LED might be on. For the display modes listed below, the screen image has been optimized during manufacture. Table 9. Preset timing modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VGA, 640 x 350 31.47 70.00 25.175 +/– VGA, 720 x 400 31.47 70.00 28.322 –/+ VGA, 640 x 480 31.47 60.00 25.175 –/– VGA, 640 x 480 37.50 75.00 31.500 –/– Mac. 640 x 480 35.00 66.67 30.240 –/– SVGA, 800 x 600 35.16 56.20 36.000 +, –/+, – SVGA, 800 x 600 37.88 60.30 40.000 +/+ SVGA, 800 x 600 46.875 75.00 49.500 +/+ Mac. 832 x 624 49.73 75.00 57.284 –/– XGA, 1024 x 768 48.36 60.00 65.000 –/– XGA, 1024 x 768 56.48 70.00 75.000 –/– XGA, 1024 x 768 60.02 75.00 78.750 +/+ Appendix Changing the Base Removing the base Turn off your monitor and unplug its power cord. 1 Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect 2 the screen. Remove the four screws and then remove the Stand from the LCD monitor. 3 English 27 28 Attaching a base NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interface pad. 1 Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other base. Maintenance of Your Flat Panel Display WARNING: To avoid risk of electric shock, do not disassemble the monitor cabinet (except for gaining access to the cable connectors as described on page 6). Users cannot service the monitor. User maintenance is restricted to cleaning as explained below: Unplug the monitor from the power outlet before cleaning. n To clean your flat panel display screen, lightly dampen a soft, clean cloth with water or mild detergent. If possible, use a special screen cleaning tissue or solution suitable for the antistatic coating. n To clean the monitor cabinet, use a cloth lightly dampened with a mild detergent. n Never use flammable cleaning material to clean your flat panel display or any other electrical apparatus. Mounting interface pad Rear cover mounting pad Appendix INDEX Numerics 15-pin D-sub connector 25 A Audio controls 18 Auto adjustment 11 AUTO button 10 Automatic save 11 B Bases Angle-pivot 3 Multimedia 3 Pivot Multimedia 3 Wire-frame 3 Bass 18 Brightness 12, 13 Brightness button 10 Buttons – /+ 10 AUTO 10 Brightness 10 EXIT 10 MENU 10 Power 10 C Cable connections 5 Coarse 14 Color control 15 Color temperature 15 Contrast 13 D DC adapter 3 Deep sleep mode 19 Display mode 17 E EXIT button 10, 13 F Fine 14 G Getting help 9 H H-position 14 I Image lock 14 Coarse 14 Fine 14 Internal microphone 18 K Kensington security slot 4 L Language 16 M MENU 10 MENU button 12, 13 Menu display time 16 Menu position 16 Mic 18 Microphone 18 Multimedia base 3 Multimedia connections 6 Multimedia base 3 O On-screen menu (OSM) 12 OSM lock/unlock 12 P Plug and play 7 Power button 10 Power indicator 10 Preset timing modes 26 R Reset 15 Color 15 Geometry 15 S Safety instructions 2 Screen contr...