Stimmen - 6, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• Otherwise, it may result in a problem with the product or injury. Take care when adjusting the angle of the product or the height of the stand. • If your hand or finger is caught, you may be injured. • If the product is tilted excessively, the product may fall and this may result in injury. Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product. • Straighten your back. • Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and face the screen forwards. • Adjust the angle of the product so that light is not reflected onto the screen. • Keep your elbow at a right angle and keep your arm level with the back of your hand. • Keep your elbow at a right angle. • Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart. 1-3 Major Safety Precautions 2 Installing the Product 2-1 Package Contents E9 • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items. Type 1 Monitor and HAS stand Type 2 Monitor and HAS-USB stand CONTENTS ¿ZJ O Installation Manual Product Warranty User Manual D-Sub Cable (Not available in all locations) □ - Power Cord Cleaning Cloth Cable holding ring Installing the Product 2-1 OPTIONAL PARTS ¡3 • The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. • The cleaning cloth is supplied with black high-glossy models only. 2-1 Installing the Product 2-2 Installing the Stand ¡3 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Place a soft cloth over the table to protect the product and place the product onto the cloth face down. Insert the stand body into the stand base as shown in the figure. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. - Caution Do not lift the product holding only the stand. S3 Disassembly is in the reverse order of the assembly. Installing the Product 2-2 à When pivot the monitor from horizontal to vertical,tilt the monitor backward to maximum first. Q G Stand Stopper 2-2 Installing the Product 2-3 Installing the Stand for the Wall Mount This product provides a stand mount of 100 mm x 100 mm ( 3.9 inches x 3.9 inches ) that complies with the VESA specifications. Installing the Product 2-3 HAS Stand Monitor © Mounting interface pad (Sold separately) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards. 3. Separate the stand. 4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw. Q • If you use a screw that is longer than the standard specifications, the inside of the product may be damaged. • For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. • Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive force. • This may result in damage to the product or injury due to the product falling. • The company shall not be held liable for any damage or injury. • The company shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation engineer. • When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the wall. • The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications. • Use the wall mount according to the international specifications. 2-3 Installing the Product 2-4 Connecting with a PC ¡3 The connecting part may differ depending on the product model. 1. Connect the product to a PC depending on the video output supported by the PC. • When the graphics card provides D-Sub (