Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Screen controls Icon Menus and Sub-menus Function Descriptions Auto Adjustment "Auto adjustment" allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. Contrast Brightness Image Lock Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. AUTO PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP 4_E150MP170MPbody.fm Page 12 Wednesday, September 19, 2001 2:54 PM English 13 Adjusting Your LCD Monitor Fine Coarse The Fine and Coarse adjustments allow you to fine tune the image quality of your monitor to your preference. Use the " " and " " buttons to remove any noise. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. This function may change the width of the image. Use the H-Position menu to center the image on the screen. When Fine value is wrong. When Coarse value is wrong. Information Display current display mode. Reset Image lock and position parameters are replaced with the factory default values. H-Position V-Position Table 1. Screen controls (Continued) Icon Menus and Sub-menus Function Descriptions PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP PC V1 V2 TV Source PIP Exit Menu CH VOL SyncMaster 150MP 4_E150MP170MPbody.fm Page 13 Wednesday, September 19, 2001 2:54 PM 4_E150MP170MPbody.fm Page 14 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Color The tone of color can be changed from redish white to bluish white. The individual color components are also user customizable. Mode1 Redish white. Mode2 Plain white. Mode3 Bluish white. User Mode User customizable. Reset Color parameters are replaced with the factory default values. PIP(Picture-in- Picture) When external A/V devices such as VCR, DVD or RF(TV)cable are connected to the monitor, PIP allows you to watch video from such devices in a small window super-imposed on pc video signal. Size Resize PIP window. Position Change PIP window position. TV Setup The channel system can be set in several different ways. *Channel system Select a channel system that is being used in your region. (See "PAL broadcasting systems" on page 29) CCIR AUSTRALIA Upon selecting a channel system, you will be asked if you want to perform "Channel auto program ". Select "OK " to perform the "Channel auto program " or select "Cancel" to select different channel system. Icon Menus and Sub-menus Function Descriptions * According to our R&D Lab test result, "Channel auto program" usually takes around 8 minutes to scan 70 channels. The scanning can be longer or shorter depending on the number of channels . English 14 4_E150MP170MPbody.fm Page 15 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Manual Tune Due to the weak signals or a wrong antenna configuration, some of the channels may not be tuned correctly or there could be a mismatch of the channel number between a Real channel and a Program channel. Use this menu to fine tune and perform necessary corrective actions. • Program : Program numbers are given in a sequential manner based on the search order of Channel Auto Program. • Channel: Channel numbers are given according to the CCIR or Australia standard channel table. • Save - Use buttons to fine tune the picture quality and then select "Save"menu. Now press "Menu" button to save the fine tuned channel. • Add - Use this function to add a real channel. - Use buttons to select a desired channel and then select "Add" menu. Now press "Menu" button to add the channel. • Cancel - Use this menu to undo the current job. Stereo System • In most of the cases, stereo system is automatically detected. But, in case you are experiencing audio problem, use this menu to manually select the stereo system. Currently selected stereo system is highlighted and you can change the stereo system manually. Use buttons to select a stereo system. B/G A2 B/G NICAM I NICAM D/K NICAM Icon Menus and Sub-menus Function Descriptions English 15 4_E150MP170MPbody.fm Page 16 Wednesday, September 19, 2001 2:54 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued) Channel Sort Channel order can be re-arranged by this menu. If you want to place P5 before P2, see the example below. Example) from : P5 to : P2 Before: P1 P2 P3 P4 P5 New: [ P1 P5 P2 P3 P4 ] P1 P2 P3 P4 P5 Store Select "store" menu to save the adjustment. Channel Delete Select a channel you wish to delete by using the " From" menu, them select "Channel Delete" to delete the selected channel. Video Control T...
Dieses Handbuch ist für folgende Modelle:Monitore - 150MP (3.78 mb)