Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Pressing the [Q/©] button when the OSD menu is not displayed will change the input source (Digital/Analog). If you power on the product or change the input source by pressing the [Q/©] button, a message that shows the changed input source will appear at the top left corner of the screen. AUTO Press the [AUTO] button to automatically adjust the screen settings. • Available only in Analog mode. • Changing the resolution in Display Properties will activate the Auto Adjustment function. CD Use this button for turning the Display on and off. O (Power lamp) The power indicator will be lit when the product is operating normally. I—- • Refer to "11.2 PowerSaver" for details about the power-saving function. • To reduce power consumption. it is best to remove the power cable when you will not be using the product for an extended period of time. Speaker Ik« If the 11th digit of the model code is M, the model has internal speakers. E.g,) LF22NEBHBNMEN OSD Guide Press one of the buttons on the monitor, OSD Guide will appear on the screen. If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the menu for the pressed button appears. To go to the menu, press the button on the front of the monitor again. OSD Guide may vary according to functions and models. Please refer to actual product. 1 Preparations 22 1.2.2 Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Ports (® \ .w -f®) [RGB IN] - Connects to a PC device using the D-SUB cable. [RGB OUT] - Connects to a Monitor device using the D-SUB cable. ® Connects to the DC power adapter. u Connect to a network using the LAN cable. Q Receives sound from a PC via an audio cable. O [MIC] Connect to a microphone. OuO] Connect to an audio output device such as headphones. of^/o Connect to another monitor using the RS232C cable. 1 1 USB memory device port 1 Preparations 23 1.3 Installation 1.3.1 Attaching the Stand cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. stand in the direction of the arrow. you are finished attaching the stand. Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base. After installing the stand, place the product upright. You can remove the fixing pin and adjust the stand now. - Caution Do not hold the product upside down only by the stand. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1 Preparations 24 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. • To adjust the height, remove the fixing pin. • The monitor tilt and height can be adjusted. • Hold the top center of the product and adjust the height carefully. 1.3.3 Rotating the Monitor You can rotate your monitor as shown below. mx • Be sure to fully extend the stand before rotating the monitor. • If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the floor and get damaged. • Do not rotate the monitor counterclockwise. The monitor may get damaged. 1 Preparations 25 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. cushion on a flat surface. Next, back of the product. place the product with the face down on top of the cloth or cushion. Installing a Wall-mount Kit or Desktop Stand o Attach the wall-mount kit or desktop stand here ^ Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach. 1 Preparations 26 __ Notes • Using a screw longer than the standard length can damage the Internal components of the • The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. • Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force. • Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own. • To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm or farther away from the wall. • Be sure to use a wall-mount kit that complies with the standards. 1.3.5 Anti-theft Lock An anti-theft lock allow...
Dieses Handbuch ist für folgende Modelle:Monitore - TC220W (3.78 mb)