Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1. Off 2. On Note If you want to reduce the standby power consumption, set Energy Saving to On. However, when Energy Saving is On, you cannot use the remote Power On function of the MDC and the WOL (Wake On LAN) function of MagicInfo. HDMI Black Level MENU > >>> ENTER > [Setup] >>>> > > ENTER > [HDMI Black Level ] > , > ENTER When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level. 1. Normal 2. Low Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting. MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ] Adjusting the PDP Display Note When Video Wall is running, the Auto Adjustment, Image Lock, and Size functions are not available. Video Wall does not operate in MagicInfo mode. Video Wall MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> ENTER > [Video Wall ] > , > ENTER Turns Off/On the Video Wall function of the selected display Off/On. 1. Off 2. On Format MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > ENTER > [Format] > , > ENTER The Format can be selected to see a divided screen. 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > > ENTER > [Horizontal] > , > ENTER Adjusting the PDP Display Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > > > ENTER > [Vertical] > , > ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU > >>> ENTER > [Setup] >>>> > > > ENTER > [Video Wall ]> > > > > ENTER > [Screen Divider] The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Divider. • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. Adjusting the PDP Display • The Safety Screen function scrolls the screen for the specified period of time. • This function is not available when the power is turned off. MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] Pixel Shift Pixel Shift MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > ENTER > [Pixel Shift] > ENTER > [Pixel Shift] > , > ENTER To prevent after-images on the screen you can use this function, so that every minute pixels on the PDP are moved in horizontal or vertical direction. 1. Off 2. On Note The Pixel Shift is not available when Video Wall is On. Horizontal Dot MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > ENTER > [Pixel Shift] > > ENTER > [Horizontal Dot] > , > ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical Line MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > ENTER > [Pixel Shift] > >> ENTER > [Vertical Line] > , > ENTER Adjusting the PDP Display Sets how many pixels the screen moves vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Time MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > ENTER > [Pixel Shift] > >>> ENTER > [Time] > , > ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > ENTER > [Timer] > ENTER > [Timer] > , > ENTER You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. 1. Off 2. On Mode MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > ENTER > [Timer] > > ENTER > [Mode] > , > ENTER Adjusting the PDP Display You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser 4. All White 5. Pattern Period MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > ENTER > [Timer] > > > ENTER > [Period] > , > ENTER Use this function to set the execution period for each mode set in the timer. Time MENU > >>>ENTER > [Setup] >>>> > > > > ENTER >[Safety Screen] > > ENTER > [Timer] > > > > ENTER > [Time] > , > ENTER Within the set period of time specify a time for execution. • Mode-Scroll : 1~5 sec • Mode-Bar, Eraser : 10~50 sec • Mode-All White, Pattern : 1, 5, 10, 20, 30 min Scroll Adjusting the PDP...
Dieses Handbuch ist für folgende Modelle:Monitore - P50F (2.33 mb)
Monitore - P50FN (2.33 mb)
Monitore - P63F (2.33 mb)