Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Please change to the recommended mode during this one-minute period. ( The message is displayed again if the system is rebooted. ) The monitor is in PowerSaver mode. Press a key on the keyboard to activate the monitor and restore the image on the screen. If there is still no image, press the 'SOURCE' button. Then press any key on the keyboard again to activate I cannot see the On Screen Display. The screen shows strange colors or just black and white. The screen suddenly has become unbalanced. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. There are only 16 colors shown on the screen. The screen colors have changed after changing the video card. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Have you locked the On Screen Display (OSD) Menu to prevent changes? Is the screen displaying only one color as if looking at the screen through a cellophane paper? Have the screen colors become strange after running a program or due to a crash between applications? Has the video card been set properly? Have you changed the video card or the driver? Have you adjusted the resolution or frequency to the monitor? the monitor and restore the image on the screen. Unlock the OSD by pressing the [ ] button for at least 5 seconds. Check the signal cable connection. Make sure the video card is fully inserted in it's slot. Reboot the computer. Set the video card by referring to the video card manual. Adjust screen image position and size using the OSD. Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes). The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD. Have you adjusted the resolution or frequency on the monitor? Is the frequency properly adjusted when checking the Display Timing on the menu? Have the Windows colors been set properly? Has the video card been set properly? Have you installed the monitor driver? See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes). Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes. ( The maximum frequency per resolution may differ from product to product. ) Windows XP : Set the resolution at the Control Panel > Appearance and Themes > Display > Settings. Windows ME/2000 : Set the resolution at the Control Panel > Display > Settings. Set the video card by referring to the video card manual. Install the monitor driver according to the Driver Installation Instructions. Install the monitor driver according to the Driver Installation Instructions. Problems related to Audio No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. (Refer to Connecting the Monitor) Check the volume level. Check when MagicTune™ does not function properly. MagicTune™ doesn't work properly. Sound level is too low. MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play. Have you changed your PC or video graphic card? Did you install the program? Check the volume level. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. * To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows™ is XP); Control Panel > Performance and Maintenance > System > Hardware > Device Manager > Monitors > After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware. MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. Download the latest program. The program can be downloaded Reboot the computer after installing the program for the first time. If a copy of the program is already installed, remove it, reboot the computer, and then install the program again. You need to reboot the computer for it to operate normally after installing or removing the program. Visit the MagicTune™ website and download the installation software for MagicTune™ MAC. Check the following items if there is trouble with the monitor. Symptom The screen does not appear when I switch to the Client Mode. The client screen appears, but I cannot connect to the server. I cannot access the Internet in the Client screen. The contents (video, voice) on the server do not play smoothly on the Client Monitor. Solutions When booting up, it takes about 30 seconds for the networking functions to be activated and no screen is displayed for about 3 to 4 seconds. Wait 30 seconds after the power is turned on,...
Dieses Handbuch ist für folgende Modelle:Monitore - 911LT (5.52 mb)