Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
At the time, each product will follow commands but it will not respond with ACK. • Power Control • Function Personal Computer turns TV / Monitor power ON/OFF. • Get Power ON/OFF Status Header command 0xAA 0x11 ID DATA Length 0 CheckSum • Set Power ON/OFF Header command ID DATA Length DATA CheckSum 0xAA 0x11 1 Power Power : Power code to be set on TV / Monitor 1 : Power ON 0 : Power OFF Introduction • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘A' 0x11 Power Check Sum Power : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x11 ERR Check Sum ERR : Error code that shows what occurred error is • Volume Control • Function Personal Computer changes volume of TV / Monitor. • Get Volume Status Header command 0xAA 0x12 ID DATA Length 0 Checksum • Set Volume Header command ID DATA Length DATA Checksum 0xAA 0x12 1 Volume Volume : Volume value code to be set on TV / Monitor (0 ~ 100) • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘A' 0x12 Volume Check Sum Volume : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x12 ERR Check Sum ERR : Error code that shows what occurred error is Introduction • Input Source Control • Function Personal Computer changes input source of TV / Monitor. • Get Input Source Status Header command 0xAA 0x14 ID DATA Length 0 CheckSum • Set Input Source Header command ID DATA Length DATA CheckSum 0xAA 0x14 1 Input Source Input Source : Input Source code to be set on TV / Monitor 0x14 PC 0x1E BNC 0x18 DVI 0x0C AV 0x04 S-Video 0x08 Component 0x20 MagicInfo 0x1F DVI_VIDEO 0x30 RF(TV) 0x40 DTV 0x21 HDMI1 0x22 HDMI1_PC 0x23 HDMI2 0x24 HDMI2_PC 0x25 DisplayPort Caution DVI_VIDEO, HDMI1_PC, HDMI2_PC ^ Get Only In the case of Magiclnfo, only possible with models include Magiclnfo In the case of TV, only possible with models include TV. • Ack Header com- ID DATA Ack/Nak r-CMD Val1 Check mand Length Sum Introduction 0xAA 0xFF 3 ‘A' 0x14 Input Source Input Source : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x14 ERR Check Sum ERR : Error code that shows what occurred error is • Screen Mode Control • Function Personal Computer changes "Screen Mode" of TV/Monitor. Cannot be controlled when Video Wall is on. A Caution Only works with models include TV. • Get Screen Mode Status Header command 0xAA 0x18 ID DATA Length 0 Checksum • Set Picture Size Header command DATA DATA ID Length Checksum 0xAA 0x18 1 Screen Mode Screen Mode : Screen Mode code to be set on TV / Monitor 0x01 CD 0x04 Zoom 0x31 Wide Zoom 0x0B 4 : 3 • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check 0xAA 0xFF 3 ‘A' 0x18 Screen Mode Sum Screen Mode : Same as above Introduction • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x18 ERR Check Sum ERR : Error code that shows what occurred error is • Screen Size Control • Function Personal Computer recognizes the screen size of TV / Monitor. • Get Screen Size Status Header command 0xAA 0x19 ID DATA Length 0 Checksum • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check 0xAA 0xFF 3 ‘A' 0x19 Screen Size Sum Screen Size : Screen Size of TV / Monitor (Range : 0 ~ 255, Unit : Inch) • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x19 ERR Check Sum ERR : Error code that shows what occurred error is • PIP ON / OFF Control • Function The PC turns the PIP function of a TV or Monitor ON / OFF. This does not operate in MagicInfo mode. • Get the PIP ON / OFF Status Header command 0xAA 0x3C ID DATA Length 0 CheckSum Introduction • Set the PIP ON / OFF Header command ID DATA Length DATA Checksum 0xAA 0x3C 1 PIP PIP : The PIP ON / OFF code to set for the TV or Monitor 1 : PIP ON 0 : PIP OFF • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘A' 0x3C PIP Check Sum PIP : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x3C ERR Check Sum ERR : Error code that shows what occurred error is • Auto Adjustment Control (PC, BNC Only) • Function Personal Computer controls PC system screen automatically. • Get Auto Adjustment Status None • Set Auto Adjustment Header command DATA DATA ID Length Checksum 0xAA 0x3D 1 Auto Adjustment Auto Adjustment : 0x00 (Always) • Ack Header com- ID DATA Ack/Nak r-CMD Val1 Check mand Length Sum Introduction Auto Ad- 0xAA 0xFF 3 ‘A' 0x3D justment • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 0xAA 0xFF 3 ‘N' 0x3D ERR Check Sum ERR : Error code that shows what occurred error is • Video Wall Mode Control • Function Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is ON. Only works with TV / Monitor wher...
Dieses Handbuch ist für folgende Modelle:Monitore - 400FP-3 (4.56 mb)
Monitore - 400MX-3 (4.56 mb)
Monitore - 460FP-3 (4.56 mb)