Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the LCD Display. Speaker Rear Note For detailed information concerning cable connections, refer to Connecting Cables under Setup. The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model. Introduction POWER S/W ON [¦ ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. HDMI IN Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. Up to HDMI cable 1.0 can be supported. LAN (LAN Connection Terminal) USB(USB Connection Terminal) Keyboard / Mouse, Mass Storage Device Compatible. nal. AUDIO OUT Headphone/External speaker output termi RS232C OUT/IN (RS232C Serial PORT) Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency. Introduction POWER OFF Number Buttons INFO COLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP Turns the product On. Turns the product Off. Press to change the channel. DEL button + VOL MUTE TV/DTV MENU 1. POWER 2. Off 3. Number Buttons The "-" button operates only for DTV. It is used to select 4. DEL button MMS (multi-channel) for a DTV. Introduction 5. + VOL 6. MUTE 7. TV/DTV 8. MENU 9. 10. INFO 11.COLOR BUTTONS 12. TTX/MIX 13.STILL 14.AUTO 15. S.MODE 16.MDC 17.LOCK 18. SOURCE 19. ENTER/PRE-CH 20. CH/P 21.D.MENU 22.GUIDE Adjusts the audio volume. Pauses (mutes) the audio output temporarily. This is dis played on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode. Selects the TV and DTV mode directly. Opens the on-screen menu and exits from the menu or closes the adjustment menu. Activates a highlighted menu item. Current picture information is displayed on the upper left corner of the screen. Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu. TV channels provide written information services via teletext. -Teletext Buttons For more information > TTX / MIX Press the button once to freeze the screen. Press it again to unfreeze. Adjusts the screen display automatically in PC mode. By changing the resolution in the control panel, auto function is performed. When pressing this button, the current mode is displayed at the bottom centre of the screen. The LCD Display has a built-in high fidelity stereo amplifier. Then press the button again to circle through available preconfigured modes. ( Standard > Music > Movie > Speech > Custom ) MDC Quick Launch Button. Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons. Press the button to change the input signal SOURCE. Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time. This button is used to return to the immediately previous channel. In TV mode, selects TV channels. DTV menu display Electronic Program Guide (EPG) display. Introduction 23. RETURN 24. Up-Down Left-Right buttons 25. EXIT 26. SRS 27.MagicInfo 28. P.MODE 29. DUAL/MTS 30. PIP 31.SWAP Returns to the previous menu. Moves from one menu item to another horizontally, vertically or adjusts selected menu values. Exits from the menu screen. Selects SRS TruSurround XT mode. MagicInfo Quick Launch Button. When you press this button, current picture mode is displayed on the lower center of the screen. AV/HDMI/TV: P.MODE The LCD Display has four automatic picture settings that are preset at the factory. Then push button again to circle through available preconfigured modes. ( Dynamic > Standard > Movie > Custom ) PC/DVI/MagicInfo: M/B (MagicBright) MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. (Entertain >Internet >Text >Custom ) DUAL STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV. MTS- You can select MTS (Multichannel Television Stereo) mode. Audio Type MTS/S_Mode Default FM Stereo Mono Mono Manual Stereo Mono - Stereo Change SAP Mono - SAP Mono Every time you press the button, a PIP screen appears. -This fuction does not work for this LCD Display. Swaps the contents of the PIP and main image. The image in the PIP window wil...