Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
► — ENTER Adds a natural tone to the display. Color Tone LU MENU — t — ENTER — [Picture] — T — T — ENTER — [Color Tone] — a , t — ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available when Dynamic Contrast is set to On.) 1. Off 2. Cool2 3. Cooll 4. Normal 5. Warml 6. Warm2 № Note If you set the Color Tone to Cool2, Cooll, Normal, Warml, or Warm2, the Color Temp function is disabled. AHCT Color Temp MENU — t — ENTER — [Picture] — T —T —t — ENTER — [Color Temp.] 63 Adjusting the LCD Display — ► — ENTER Color temp is a measure of the 'warmth' of the image colors. (Not available when Dynamic Contrast is set to On.) ©Note This function is only enabled if the Color Tone is set to Off. Size AHC MENU — t — ENTER — [Picture] — T — t — t — t — ENTER — [Siz0l — a , t — ENTER The Size can be switched. 1. 16:9: Sets the picture to 16:9 wide mode. 2. Zoom 1: Magnifies the size of the picture on the screen. 3. Zoom 2: Magnifies the size of the picture more than Zoom 1. 4. 4:3: Sets the picture to 4:3 normal mode. 5. Screen Fit: Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input. (Not available when Dynamic Contrast is set to On.) (0Note Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Screen Fit feature. Zoom 1, Zoom 2 are unavailable in HDMI mode. ®Note The Position and Reset functions are available in Zoom 1 and Zoom 2 modes. Digital NR (Digital Noise Reduction) MENU — t — ENTER — [Picture] — T — t — t — t — t — ENTER — [Digital NR] AH C T 64 Adjusting the LCD Display — a , t — ENTER Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On l:' I Note Digital NR function is not available for all resolutions. HDMI Black Level MENU — t — ENTER — [Picture] — t — t — t —t —t —t — ENTER — [HDMI Black Level] -- Mode Custom Custom E? 0 Color Tone Color Temp : Off Size : 16:9 Digital NR : On £ i| HDMI Black Level -w More Low — a , t — ENTER When a DVD or set-top box is connected to your TV via DVI, HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected.In this case, adjust the screen quality of your TV by configuring the HDMI black level. 1. Normal 2. Low l' I Note For Timing which can be used for both the PC and the DTV in DVI, HDMI mode, HDMI Black Level will be activated. Film Mode G MENU — t — ENTER — [Picture] — t — t — t — t — t — t — ENTER — [Film Mode] 65 Adjusting the LCD Display i £ (!) a. More Film Mode PIP Picture On Dynamic Contrast : Off Lamp Control : 100 Brightness Sensor : Off — a , t — ENTER The Film Mode feature offers you a theater-quality viewing experience. (In HDMI mode, this function is available when the input signal is interlaced scan; it is not available in progressive scan.) 1. Off 2. On PIP Picture LU MENU — t — ENTER — [Picture] — t — t — t — t — t — t — t — ENTER — [PIP Picture] — a , t — ENTER Adjusts the PIP Screen Settings. ©Note Available Modes: PIP ON 1. Contrast MENU — t — ENTER — [Picture] — T — t — t — t — t — t — t — ENTER — [PIP Picture]^ ENTER— [Contrast] — h*. ► — ENTER Adjusts the Contrast of the PIP window on the screen. 2. Brightness MENU — t — ENTER — [Picture] — T — t — t — t — t — t — t — ENTER — [PIP Picture]^ ENTER— [Brightness] — H*. ► — ENTER Adjusts the Brightness of the PIP window on the screen. 3. Sharpness MENU — t — ENTER — [Picture] — t — t — t —t —t— t— ENTER — [PI P Picture] — ENTER — T— T— [Sharpness] 66 Adjusting the LCD Display — Hi, ► — ENTER Adjusts the difference between the lightest and darkest areas of the PIP window. Adjusts the Sharpness of the PIP window on the screen. 4. Color MENU — t — ENTER — [Picture] — T — t — t —t —t— T— ENTER — [PI P Picture] — ENTER — T— T— t— [Color] — h*. ► — ENTER Adjusts the Color of the PIP window on the screen. Note • Enabled only when the PIP input is selected in AV, HDMI, Component or TV mode. 5. Tint MENU — t — ENTER — [Picture] — T — [PIP Picture] ENTER — t * t * ¥ * t * [Tint] r— ENTER — — h*, ► — ENTER Adds a natural tone to the PIP window. ©Note Enabled only when the PIP input is selected in AV, HDMI, Component or TV mode. Operates only if the video signal is NTSC. Dynamic Contrast AH C T MENU — t — ENTER — [Picture] [Dynamic Contrast] — ENTER — Dynamic Contrast Lamp Control Bnghtness Sensor * a , t * ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 67 Adjusting the LCD Display 1. Off 2. On Lamp Control AH C T MENU — T — ENTER — [Picture] — [Lamp Control] — ENTER — — — ENTER Adjusts the inverter lamp in order to reduce...
Dieses Handbuch ist für folgende Modelle:Monitore - 400CX-2 (8.61 mb)
Monitore - 400CXN-2 (8.61 mb)
Monitore - 460CXN-2 (8.61 mb)