Login:
Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Anleitung Samsung, modell 400TS-3

Hersteller: Samsung
Dateigröße: 5.52 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:
Monitore - 400TS-3 (5.46 mb)de
Monitore - 400TS-3 (4.86 mb)
Monitore - 400TS-3 (6.19 mb)en
Monitore - 400TS-3 (6.88 mb)es

Anleitung Zusammenfassung


©Note • Enabled only in PC, DVI, HDMI, or DP(DisplayPort) mode. • Auto will be disabled in HDMI mode. Lamp Schedule Adjusts the luminance to a user-specified value at a specified time. OSD Display Displays or hides a menu item on the screen. Source OSD Source OSD [off! £ Not Optimum Mode OSD : On No Signal OSD : Off © MDCOSD : Off € ilk " -M Off On Adjusting the LCD Display Not Optimum Mode OSD Source OSD £ Not Optimum Mode OSD | Off I No Signal OSD On © MDC OSD Off £ iiw ■ • Off • On No Signal OSD ’dftPSfflE? Source OSD Off £ Not Optimum Mode OSD Off No Signal OSD MDC OSD On t ILK • Off • On MDC OSD OZO Oh'Mv Source OSD Off Not Optimum Mode OSD Off I? No Signal OSD Off © MDC OSD £ ll*L • Off • On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an SW code. The image below will appear on the screen of the product. 2. While a BMP image onto which the software code has been converted is displayed on the screen, select Software Upgrade. Adjusting the LCD Display When there are two or more BMP images, they are displayed on the screen using a slideshow. • It is recommended that the playback interval between two BMP images in the slideshow should be one second. The image extraction probability will decrease with other playback intervals. • A BMP image might not be extracted if it is covered by another image (for example, the mouse pointer). 3. If a more recent version than the current software version is detected, you will be asked whether to upgrade the current software. If you select , the upgrade is performed. 4. When the software upgrade is completed, the product is turned off and on automatically. Fan & Temperature £ □ Auto Power : Off Upgrade is completed Power will be off and turned on automatically 1 OK 1 € OSD Display iiv Software Upgrade c' I Note • This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The input resolution must be identical to the panel resolution.) • In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported if the Edit Name is set to PC or DVI PC. • This is only supported if the Size is set to 16:9. Setup Reset B D Reset Settings in Setup? VS No Reset all the values for a setting. Reset All Settings return to default settings. Yes No I Adjusting the LCD Display Reset all the settings for the display. Multi Control Available Modes • □ PC / DVI / DisplayPort • E AV • E Component • HDMI • m MagicInfo • □ IV c" I Note • MagicInfo can only be enabled when a network box(sold separately) is connected. • A TV tuner box (sold separately) must be connected to use the TV. Multi Control E Assigns an individual ID to the SET. -fiM iPgiitrsi-- ^1 ID Setup : CO £ ID Input : “ 0 MDC Connection : RJ45 MDC ► £ K Network Setting ► • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. • MDC Connection Selects a port to receive the MDC inputs from. • RS232C MDC : Communicates with the MDC via a RS232C MDC cable. • RJ45 MDC : Communicates with the MDC via an RJ45 MDC cable. • Network Setting • IP Setting : Manual, Auto • IP Address : Manually enter the IP Address if IP Setting is set to Manual. Adjusting the LCD Display • Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual. • Gateway : Manually enter the Gateway if IP Setting is set to Manual. MagicInfo Available Modes • □ PC / DVI / DisplayPort • E AV • E Component • HDMI • m MagicInfo • Otv c' I Note • MagicInfo can only be enabled when a network box(sold separately) is connected. • A TV tuner box (sold separately) must be connected to use the TV. c' I Note • The remote control can be used to select MagicInfo. However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully. • For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external devices only if the LCD Display turns on. • Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the Program (MagicInfo) may stop. If you do unplug the cable, restart the system. • Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the Program (MagicInfo) may stop. • To access other sources, press the SOURCE button in MagicInfo. • The preset password for the LCD Display is "000000". • The server Program's Power-On option works only if the LCD Display's power is completely shut off. Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display. • When using MagicInfo with the MagicInfo...

Dieses Handbuch ist für folgende Modelle:
Monitore - 460TS-3 (5.52 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien