Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
- This fuction does not work for this monitor. CH/P 15) In TV mode, selects TV channels. - This fuction does not work for this monitor. SOURCE 16) Changes the video source. INFO 17) The current picture information is displayed in the top left corner of the screen. EXIT 18) Exits from the menu screen. 19) Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 20) S.MODE When pressing this button, the current mode is displayed at the bottom centre of the screen. The LCD Display has a built-in high fidelity stereo amplifier. Then press the button again to circle through available preconfigured modes. ( Standard > Music > Movie > Speech > Custom ) 21) STILL Press the button once to freeze the screen. Press it again to unfreeze. 22) FM RADIO Turns the FM Radio on/off. In PC/DVI mode, sets the SOUND to FM Radio. In general Video mode, selects FM Radio, and turns off the screen. In areas where the signal is weak, noise may occur during FM radio broadcasts. - This fuction does not work for this monitor. 23) P.SIZE Press to change the screen size. SRS 24) SRS DUAL/MTS 25) DUAL STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV. MTS- You can select MTS (Multichannel Television Stereo) mode. Audio Type MTS/S_Mode Default FM Stereo Mono Mono Manual Change Stereo Mono - Stereo SAP Mono - SAP Mono - This fuction does not work for this monitor. PIP 26) Every time you press the button, a PIP screen appears. SOURCE 27) Changes the source of the PIP window signal. 28) SWAP Swaps the contents of the PIP and main image. The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. SIZE 29) Switches the PIP Picture Size. 30) REW Rewind 31) STOP Stop 32) PLAY / PAUSE Play/Pause 33) FF Fast forward © 1995~2007 SAMSUNG. ALL Right Reserved SyncMaster 400PXn/400PX Mechanical Lay-out | Monitor Head | Stand | Speaker | Installation VESA Bracket | Wall Bracket Installation 1. Mechanical Lay-out Dodatak .................... 2. Monitor Head 3. Stand 4. Speaker 5. Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest Samsung Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. • At least 2 persons are needed in order to move the LCD Monitor. • Samsung is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. 6. Wall Bracket Installation • Contact a technician for installing the wall bracket. • Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. Components Only use the components and accessories shipped with the product. ` Plastic Hanger (4) Screw(A) (11) Screw(B) (4) Anchor (11) Wall Bracket Hinge (1) (Left 1, Right 1) Wall Bracket Assembly Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. A. Captive Screw B. Wall Bracket C. Hinge (Left) D. Hinge (Right) To mount the product on the wall bracket There are two hinges(left and right). Use the correct one. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length. A. Length between the two locking holes Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A. The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) Remove the 4 screws on the back of the product. 1. Mount the product on the wall bracket and make sure it is properly fixed to the left and Insert the screw B into the plastic hanger. right plastic hangers. 2. Be careful when installing the product on the bracket as fingers can be caught in the holes. 3. Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixe...
Dieses Handbuch ist für folgende Modelle:Monitore - 400PX (7.4 mb)
Monitore - 460PX (7.4 mb)
Monitore - 460PXN (7.4 mb)