Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1. Off 2. On Note The Pixel Shift is not available when Video Wall is On. 64 Adjusting the LCD Display Horizontal Dot MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > ENTER > [Pixel Shift] > > ENTER > [Horizontal Dot] > , > ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Line MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > ENTER > [Pixel Shift] > >> ENTER > [Vertical Line] > , > ENTER Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time MENU > > > > ENTER > [Setup] > > > > > > > Screen] > ENTER > [Pixel Shift] > > > > ENTER > [Time] > > ENTER > [Safety , > ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > ENTER > [Timer] > ENTER > [Timer] > , > ENTER 65 Adjusting the LCD Display You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. 1. Off 2. On Mode MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > ENTER > [Timer] > > ENTER > [Mode] > , > ENTER You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser Period MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > ENTER > [Timer] > > > ENTER > [Period] > , > ENTER Use this function to set the execution period for each mode set in the timer. 66 Time Adjusting the LCD Display MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > ENTER > [Timer] > > > > ENTER > [Time] > , > ENTER Within the set period of time specify a time for execution. • Mode-Scroll : 1~5 sec • Mode-Bar, Eraser : 10~50 sec Scroll MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > > ENTER > [Scroll] This function prevents after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Bar MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > > >ENTER > [Bar] This function prevents after-images on the screen by moving long black and white vertical lines. 67 Eraser Adjusting the LCD Display MENU > >>> ENTER > [Setup] >>>> > > > > ENTER > [Safety Screen] > > > > >ENTER > [Eraser] This function prevents after-images on the screen by moving a rectangular pattern. Resolution Select MENU > >>> ENTER > [Setup] >>>> > > > > >ENTER > [Resolution Select ] > , > ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only 1. Off 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz. Power On Adjustment MENU >>>> ENTER > [Setup] >>>>>>>>>> ENTER > [Power On Adjustment ] 68 Adjusting the LCD Display > , > ENTER Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage. Side Gray MENU > >>>ENTER > [Setup] >>>> > > > > >>> ENTER > [Side Gray] > , > ENTER Select the brightness of the grey for the screen background. 1. Off 2. Light 3. Dark Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used. MENU > >>> ENTER > [Setup] >>>> > > > > >> > > ENTER > [Reset ] Image Reset MENU > >>> ENTER > [Setup] >>>> > > > > >> > > ENTER > [Reset ]> ENTER > [Image Reset ] > , > ENTER 69 Adjusting the LCD Display Note Available in PC mode only Note The Reset function is not available when Video Wall is On. Color Reset MENU > >>> ENTER > [Setup] >>>> > > > > >> > > ENTER > [Reset ]>> ENTER > [Color Reset ] > , > ENTER OSD Rotation MENU > >>> ENTER > [Setup]>>>> > > > > >> > > >> ENTER > [OSD Rotation ] > , > ENTER OSD Rotate 1. Landscape 2. Portrait Lamp Control MENU > >>> ENTER > [Setup] >>>> > > > > >> > > > ENTER > [Lamp Control ] > , > ENTER Adjusts the inverter lamp in order to reduce energy consumption. Note This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV, HDMI, TV modes. 70 Adjusting the LCD Display Multi Control Available Modes • PC / DVI • AV • HDMI • MagicInfo Multi Control Assigns an individual ID to the SET. MENU > >>> > ENTER > [Multi Control ] > ENTER > , > [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. MagicInfo A...