Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Panasonic Dateigröße: 637.95 kb Dateiname: BTLH1700W.PDF Unterrichtssprache:

The adjustment status is displayed in the bottom right when selected. *4 When “VAR1”, “VAR2” or “VAR3” is selected, the monitor switches to WB adjustment mode page 17). *5 When selecting USER0-63 1) Push [ENTER] (USER changes to blue). 2) Select 0-63 with [V, A], ar|d push [ENTER]. 16 Main Menu (continued) ■ WB adjustment mode You can adjust “WHITE BALANCE VAR1” - “WHITE BALANCE VAR3” (WB) by selecting “VAR1” - “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu. The underlined values are factory preset setting values. Sub menu Settings Explanation COLOR TEMP. Used to select the color temperature that will become the basis for adjustments. Adjustable settings 0-63 (color temperature around 3000K-9300K) Color temperature around 9300K Color temperature around 6500K Color temperature around 5600K WB-HIGH RED <0-60> (Factory preset settings: 30) Used to adjust the WB in the HIGH level R component. 1 WB-HIGH GREEN Used to adjust the WB in the HIGH level G component.*1 WB-HIGH BLUE Used to adjust the WB in the HIGH level B component. 1 WB-LOW RED Used to adjust the WB in the LOW level R component.*1 WB-LOW GREEN Used to adjust the WB in the LOW level G component. 1 WB-LOW BLUE Used to adjust the WB in the LOW level B component.*1 RESET This returns the “WB-HIGH RED” - ”WB-LOW BLUE” settings to the factory presets. *1 When adjusting, t ie item display moves to the lower part of the screen. SYSTEM CONFIG The underlined values are factory preset setting values. Sub menu Settings Explanation BACKLIGHT <0-60> Used to adjust the brightness of the liquid crystal backlight. FUNCTION1 FUNCTION2 _{Used to select the functions assigned to [FUNCTION1] and [FUNCTION2] (front buttons). *2 Displays the synchronizing signal (horizontal, vertical). The display is switched in the following order. OFF ^ H-Delay ^ V-Delay ^ HV-Delay ^ OFF *5 Used to automatically adjust the PC display. Used to cut the red and green signals. You can check the hue (PHASE) and depth of color (CHROMA). This is switched between ON/OFF by pushing the button. You can switch between “NORMAL” and “FILM”.*3*4 Used to switch between “16:9” and “4:3”.*3*4 You can switch between “UNDER” and “NORMAL’.*3*4 You can perform the settings for 2 screen display mode.*3*4*6 No settings *2 This function is disabled while in 2 screen display mode. *3 These functions are disabled when the control settings are in GPI mode. *4 If these settings are changed, the menu settings will also change. *5 When “RGB-COMP” is not selected in “YPbPr/RGB” in the “INPUT SELECT” menu, “NOT RGB-COMPCH-” is displayed, and this does not operate. *6 This function will not work when “RGB-COMP.” is selected in “YPbPr/RGB” in the “INPUT SELECT” menu. 17 Main Menu (continued) SYSTEM CONFIG The underlined values are factory preset setting values. Sub menu Settings Explanation SUB WINDOW Used to select the type of sub window. Used to reduce the whole input signal screen, and arrange it horizontally when it is displayed. Used to cut out the central section of the input signal screen, and arrange it horizontally when it is displayed (Displayed at the same size as the previous screen). Used to display the waveform display screen.*2 WFM POSITION Used to set the WFM display position. Bottom left of the screen Bottom right of the screen Top right of the screen Top left of the screen MENU POSITION}

Used to set the on screen menu display position. Center of the screen Bottom left of the screen Bottom right of the screen Top right of the screen Top left of the screen ROTARY POSITION Used to set the picture adjusting knob status (on screen menu) display position. Center of the screen Bottom left of the screen Bottom right of the screen Top right of the screen Top left of the screen STATUS DISPLAY <3SEC OFF> Used to set the input signal status (on screen menu) display status. Displayed normally. <3SEC OFF> After changing status, it is displayed for approximately 3 seconds, and then disappears. Not displayed. SETUP LOAD *1 *1 *1 *1 *1 The saved factory preset setting values (FACTORY) or the user data (USER 1-USER 5) are loaded. Also after loading user data, the screen displays the signal selected before loading data. SETUP SAVE Up to 5 sets of user data can be saved (^ page 12). The menu settings and picture ad...

Herunterladen

Geben Sie zwei Ziffern: