Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Daxten Dateigröße: 308.06 kb Dateiname: Unterrichtssprache:

Press F4 to deactivate scanning: Tuning – F5 You can tune the image of any remote computer screen from the Select Computer window. To adjust the screen image: Navigate to the remote computer you wish to adjust. Press F5 . The screen image of the selected computer appears, together with the Image Tuning label. Adjust the image by using the Right and Left Arrow keys, when the image is satisfactory, press Esc . Note! Picture quality is relative to distance. The further away a remote computer is from the SCOUTutp, the lower the image quality, and the more tuning needed. Place the higher resolution computers closer to the main unit. Moving the label – F6 Position the OSD label anywhere on the screen. To position the OSD label from the Main window, navigate to the desired computer using the Up and Down arrow keys. Press F6 . The selected screen image and Identification label will appear. Use the arrow keys to move the label to the desired position. Press Esc to save and exit. Using the Control software As an alternative to the OSD you can operate the SCOUTutp system with the Control software located on the Documentation CD. With the OSD you operate the system and view the computer screens on the same monitor. The Control software requires 2 monitors 1 for the software and 1 to view the computer screens. With the Control software you can: -View computers -Edit OSD Settings -Save configurations for future use -Read and write configurations to the SCOUTutp Switch Control software system requirements Pentium 166 or higher computer, 16Mb RAM, Windows 98 and later, a free Serial port Connecting the serial download cable To run the software, connect the serial cable to the computer containing the software, and to the SCOUTutp. Note! The system must be fully connected BEFORE running the Control software. Failure to connect the system first will lead to the software working in demo mode. To install the software: Insert and start the Documentation CD. .. Choose SCOUTutp RS232 Control. The SCOUTutp RS232 Control window appears. .. Choose Install SCOUTutp Control Software. Once installed, a shortcut icon appears on the Desktop. .. Double-click the icon to run the software. Or choose Start / Programs / SCOUTutp Control / SCOUTutp Control. .. To run the software from the CD: .. Choose Run SCOUTutp switch Control Software from CD. If the Security feature is activated, the software requires a password. Selecting a Com port (Serial port) During the Setup process you will be prompted to choose a Com port. Choose the Com port to which the serial download cable is connected. Failure to select the correct Com port will result in the software running in demo mode. Once Setup is complete the Control window appears. Computer icons Icon Meaning Icon Meaning Computer is connected and switched on Computer that you are presently connected to Computer is switched off or unconnected Connected and switched on computer with a Local Workstation attached and presently being used locally. After remaining idle for the Timeout period, it changes to yellow. When you first open the Control window the software automatically gets the status of the system, including the security access Settings. Communication Error If a Communication Error box appears when trying to scan the system, check that: The Serial download cable is connected to the computer’s and SCOUTutp IP Manager’s serial ports. The Com Port Settings in Options / Com Port are set correctly. After changing the Com port exit and re-start the Control software. The View menu From the View menu choose one of the following: -All computers, or only active switched on computers. -The Legend -The toolbar Selecting a computer To select a computer: Click on the computers icon. The system switches to that computer. The connected icon appears with a red background. Control and monitor the selected computer from the keyboard and mouse connected to the SCOUTutp. The toolbar buttons The toolbar buttons are explained below. Get Status If for whatever reason there is a break in communication between the Control software and the system, click “Get Status” to get the current status of the computers in system. The system automatically updates the status before every switch. Read Configuration To see the current Settings of the entire system (names, scan Settings etc.) click “Read Configuration”. All current Settings are received. You view the computer Settings from the Control window and other Settings from the Edit menu – discussed below. Write Configuration With the Control software you can make changes to all OSD Settings. You can then save these configurations in a file to use in the future by selecting Save or Save As from the File menu. Note! Save or Save As, will have no affect on the OSD. To change the OSD Settings you must press “Write Configuration” or choose Write Configuration from the File menu after making changes. The changes will then be sent to the SCOUTutp system Manager, and the OSD will reflect...

Herunterladen

Geben Sie zwei Ziffern: