Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Clarion
Dateigröße: 2.62 mb
Dateiname: VMA570_770_ENG.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
7 English Display mode setting To choose the proper display mode for the different video sources, please refer to display mode setting below. 1. Press MENU several times until you reach the DISPLAY MODE option. 2. Press Ў (down key) or ^ (up key) to select the display mode for: NORMAL, FULL WIDE, and WIDE. 3. WIDE may stretch the image to fill the entire screen, NORMAL displays the image at its true aspect ratio (4: ), FULL WIDE stretches the image horizontally to fit the screen for aspect ratio of 6:9. Note : • When using a DVD player as the source, make sure that the unit’s output mode is set to “FULL WIDE” or “ 6:9”. This ensures that the DVD player will generate a video signal, which can take advantage of the monitor’s aspect ratio. • When using a source that generates a “normal”, 4: image signal, such as a video game or video cassette player, the FULL WIDE mode stretches the image to fit the screen. Some minor image distortion may be visible. • Video format are automatically select between PAL or NTSC depending on the video format. Adjusting the picture For optimum picture quality, the tint, color, brightness, and contrast can be adjusted independently. 1. Press the MENU key to display the picture adjustment menus. The monitor displays the adjustment menus. 2. Press the MENU key again until you reach the option you wish to adjust. The monitor displays the adjustment bar as below. TINT adjusts the tone of color. (Only for NTSC) COLOR adjusts the color saturation. BRIGHT adjusts the monitor’s brightness. CONTRAST adjusts the differences between light and dark areas. 3. Press the ^ (up key) controls button to increase the adjustment. Press the Ў (down key) controls button to decrease the adjustment. Each setting has 0 steps of adjustment range and is preset to 5 at the factory. Once you’ve adjusted the picture, wait a moment and the adjustment menus disappear. 8 English Turning the unit off and on Press the POWER key to turn the unit off. When you turn the vehicle’s ignition off, the monitor automatically shuts off. Switching between video sources If your vehicle has two video sources, for example, a DVD player goes to AV and a game console goes to AV , you can easily switch between them. 1. Press the SOURCE key. The monitor will display AV and press the SOURCE key to select the input for AV for the game console. 2. Press the SOURCE key again to select AV input for DVD player. Note : • If you’re using only one video source, the screen remains dark when you select the unavailable source. • Default setting for VMA570 / VMA770 is AV for normal case. Playing two video sources at once If your vehicle is equipped with two LCD monitors in the headrests and two video source units, two different video sources can be viewed at the same time. Each monitor transmits the infrared audio signal over its own channel, A or B. When a vehicle has two monitors, the default is to configure the monitor in the driver’s headrest to use IR channel A, and the monitor in the passenger’s headrest to use IR channel B. You can change this. 1. Press the MENU key several times to locate the IR CH option. 2. Press down (Ў) or up (^) to alternate between A and B or OFF. Note: You don’t need to select the IR channel if your vehicle has only one monitor. Disabling automatic power on Your monitor is preset at the factory to switch on when you turn on your vehicle’s ignition. However, you can set it up to remain off until you press POWER on the monitor. 1. Press the MENU key several times until you reach the AUTO POWER option. 2. Press down (Ў) or up (^) to turn automatic power ON or OFF. Returning adjustments to the factory settings (Reset) 1. Press the MENU key several times to locate the RESET option. 2. Press either down (Ў) or up (^) to reset the settings. If you don’t wish to reset the settings, either press MENU again or wait for the monitor to exit the picture adjustment menus automatically. 9 Note : English • If you reset the options and the monitor was set to source (AV ), the monitor reverts to the default setting of AV . If there is no active video source on AV , the screen may go dark. Press SOURCE to switch the monitor back to AV . • The reset settings only valid for the Tint, Color, Brightness, Contrast, Volume that setting those parameter back to default value 5, and set to IR CHA, AUTOPOWER ON. Remote IR Function The LCD monitor comes with an IR receiver that works with Clarion remote control devices. Aim the remote control at the IR receiver during use. Note: The IR receiver only functions with selected Clarion multimedia equipment. Connecting a video source The video sources you are using may be preinstalled for you, or your configuration may be designed to allow you to change devices. For example, returning from a day at the beach, you may disconnect your game from the game port and connect your camcorder to view the video you just shot. CAUTION ! Always take care when disconnecting and connecting electronic devices. 0 3. ...