Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
THIS PRODUCT IS NOT INTENDED FOR VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION SINCE SUCH USE MAY DISTRACT THE DRIVER OR INTERFERE WITH THE DRIVER’S SAFE OPERATION OF THE VEHICLE AND MAY RESULT IN SERIOUS INJURY OR DEATH. SUCH USE MAY ALSO VIOLATE STATE LAW. CLARION DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT. INTRODUCTION: The VMA6492 is a TFT active matrix color LCD monitor which delivers a striking picture with superior image resolution. The VMA6492 integrates into a Clarion mobile multimedia systems using a VDH9600 (mobile VCR Recorder) even if no TTX001 (mobile TV tuner) is connected. The Clarion VMA6492 is a full-featured 6.4" LCD Color Monitor and has the following: • 6.4" wide-screen color LCD panel • A bright vibrant clear screen • RCA composite video & RGB 8-pin DIN Style inputs • Side mount threaded holes for easy installation with all Clarion brackets ABOUT THIS MANUAL AND WARRANTY: To start enjoying your new Clarion VMA6492 monitor, please read the instructions listed in this manual. Keep all instructions for future reference. Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty service. Also, save your original sales receipt as proof of purchase. TABLE OF CONTENTS: INTRODUCTION, ABOUT THIS MANUAL & TABLE OF CONTENTS . . . . . . . . . . . 1 PRECAUTIONS & DESCRIPTION OF BUTTONS AND CONNECTORS . . . . . . . . . . 2 DESCRIPTIONOFPICTUREADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . .3 CAREAND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 WIRINGPRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 DESCRIPTION OF INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 APPLICATIONS (withVDH9600, TTX001, and FM100S) . . . . . . . . . . . . . . . . . . .5 STAND ALONE SYSTEM (with TTX001 and WH100/WH200) . . . . . . . . . . . . . . . .6 DESCRIPTIONOF RC300 REMOTEBUTTONS: . . . . . . . . . . . . . . . . . . . . . .8 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 INTRODUCTION 1 VMA6492 6.4O TFT LCD Monitor VMA6492 6.4O TFT LCD Monitor PRECAUTIONS: DESCRIPTION BUTTONS • This monitor is intended for use in DC 12V, negative ground vehicles. • Do not operate the monitor in ways other than described in this guide. Doing so may cause damage and void the warranty. • Be careful not to run down the car’s battery while using a multimedia system with the engine stopped. Doing so may damage the vehicle’s battery or the multimedia system. • Do not disassemble or modify the monitor. Doing so may damage it and void the warranty. • Keep moisture away from the set. Water and humidity may damage the internal circuitry. • Do not let the monitor become overheated. If the temperature inside the vehicle is high or the monitor has been exposed to direct sunlight, lower the monitor’s temperature before use. (The liquid crystal panel operates within a temperature range of 30 – 113 degrees F). • In extremely cold temperatures, the movement of the picture may slow and the picture may become dark. The monitor will work normally once the temperature increases to its normal operation range. • Small black or shiny dots may be seen inside the liquid crystal panel. These are normal when manufacturing liquid crystal products. DESCRIPTION OF BUTTON AND CONNECTORS: 1 Power Indicator LED 52-Pin Molex Power Connector 2 Remote Sensor 6IR Serial Remote OUT 3 Brightness Controls 7Input Selector Switch - Video/RGB 4Video IN RCA 88-pin RGB input DIN cable 2 OWNEROS MANUAL DESCRIPTION OF PICTURE ADJUSTMENT: BRIGHTNESS: To adjust the picture brightness, use the Brightness UP and DOWN buttons 3 located on the front panel of the VMA6492. Press and hold the UP button to increase the picture brightness. Press and hold the DOWN button to decrease the picture brightness (see page 2 for button locations). VIEWING ANGLE: To adjust the viewing angle gently tilt the cabinet to the desired position. The recommended viewing angle of the unit is – 30 to +10 degrees vertical and +45 to –45 degrees horizontal. CARE AND MAINTENANCE: Cleaning the Cabinet: • Use a soft, dry cloth to gently wipe off any dirt. • Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel. Cleaning the LCD Panel: • Use a soft, dry cloth to gently wipe off any dust. • The surface is easily scratched; do not rub it with hard objects. WIRING PRECAUTIONS: Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. NOTE: The VMA6492 monitor displays video images only. It does not provide audio output. Refer to the Applications, starting on page 5, of this owner’s manual for proper connection t...