Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
When the product does not operate normally under normal operating conditions. Adjust only those controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation; e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicating a need for service. 1 TECH SUPPORT Please visit for answers to many questions or contact your local Datavideo offices worldwide to support this and other Datavideo products. Datavideo Corporation (USA) 12300-U East Washington Blvd., Whittier, CA 90606 USA Tel: +1 562 696 2324 Datavideo Technologies Europe BV Californiedreef 263565 BL Utrecht, The Netherlands Tel: +31 30 261 9656 Datavideo UK Limited Unit 2 Waterside Business Park, Hadfield, Glossop, Derbyshire SK131BE UK Tel: +44 1457 851000 Datavideo Technologies Co., Ltd. 10F, 176 Jian-Yi Rd, Chung Ho City, Taipei Hsien, Taiwan 235 Tel: +886 2 8227 2888 Datavideo Technologies China Co. 2F-D, 2 Lane 777, West Guangzhong Rd, Zhabei District, Shanghai, China Tel: +86 21 5603 6599 Datavideo Technologies (S) PTE Ltd. 100 Lor 23, Geylang Rd, #01-03 D’Centennial, Singapore 388398 Tel: +65 6749 6866 WHAT’S IN THE BOX? 1. AC / DC Switching Power Adaptor * 1 2. AC Cord * 1 4. 1.8M IEEE 1394 Firewire 6 to 4 Cable * 1 5. 1.8M IEEE 1394 Firewire 6 to 6 Cable *1 6. 1.2M BNC to BNC 75 Ohm Video cable *1 7. Stereo Audio RCA 2 to 2 Cable *1 8. Sun shade and Screws 9. Instruction Guide * 1 2 GENERAL: Datavideo TLM-70D is a 7” TFT LCD monitors, selectable DV/CV input video source and NTSC/PAL video format auto recognition with video pass through 75-ohm self-terminated video output connector. The "AUX" input provides options for an external SDI to RGB video format converters. The tilt hinges let you tilt the screen +/- 90 degree with contrast, brightness, color and tint (Tint only available for NTSC) controls for a best view quality of display. SPECIFICATIONS: • LCD Display 7" TFT LCD active matrix, resolution 1440 x 234 dots • Aspect Ratio 4:3 and 16:9 selectable • Brightness (Luminance) 500 cd/mt • Contrast Ratio 300 • View Angle Top: 40 deg Bottom: 60 deg Left: 60 deg Right: 60 deg • Video Input CV input 1.0Vp-p, with self Loop-through output 75 Ohm-terminated DV Input, support DV25 NTSC 4:1:1, PAL 4:2:0 Additional analog RGB Input for SDI format converter • Video System NTSC/PAL auto recognition • Color Adjustment Brightness, Contrast, Color, Tint • Audio Input Stereo Audio Input RCA x 2 Embedded DV Audio input • Audio Output Stereo Audio Bypass Output RCA x 2 Detachable Stereo Audio Speaker L/R • Tally Indication Three-Way Tally LED indicators • Operation condition Operation temperature from 0. to 50.., RH less than 90% • Power Consumption DC12Volt, 2A • Dimension of LCD Panel 7.5” x 5.5” x 2.5” (W x H x D) 3 FRONT PANEL 3 Color Tally LED Red, Green, Yellow Power Switcher Select DV input Select Composite Video input There are two groups of function’s operation on this button: Function 1: Click on the button to select three display aspects of 4:3, 16:9 or 16:9 aspect with different horizontal timing scaling. Function 2: Push and hold on the button 2 seconds to select display effects; Release the button to enable the selected effect accordingly. 1). Push and hold on the button 2 seconds to select “Mirror” effect. 2). Keep holding for another 2 seconds to flip the video “Up Side Down”. 3). Keep holding for another 2 seconds to back to normal display mode. Audio output Volume Adjustment Ear Phone output 4 REAR PANEL 98 10 1 2 43 5 6 7 1. DV Input: Support DV25, NTSC 4:1:1, PAL: 4:2:0 2. DV Loopthru Output 3. CV and Stereo Audio Input. 4. Video/ Bypass Output and Audio Line out 5. DC power input: 12V, 2.0Amp 6. Color adjustments: Brigtness, Contrast, Color, Tint for CV input, DV input can adjust only the Brightness 7. Stereo Audio Speaker Output L/R 8. Tally LED Control Input (D-Sub 15-Pin): D-Sub 15 pins connector on the rear panel. It works by closing contacts between a ground pin and the corresponding LED pin as following pin out table. Do not give power to the pins. LED Red Green Yellow Pin 1-4 short 2-4 short 3-4 short 5 9. AUX Video Input (D-Sub 9-Pin): An additional video input terminal with RGB and Sync input interface. Connect the Pin 7 to Ground (Short the Pin 7 & 8) to activate this interface and turn on the 12VDC power output on Pin 1 & 6. • PIN 1: 12VDC 300mA output • PIN 2: Video “R”Input • PIN 3: Video “G”Input • PIN 4: Video “CV_Sync”Input • PIN 5: Video “B”Input • PIN 6: 12VDC 300mA output • PIN 7: SDI Switch (Connect to Ground to enable RGB Input of Pin 2-5) • PIN 8: Ground • PIN 9: Ground 10.DIP Switch setting for DV Input mode select Please refer t...