Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Copyright © 2006 by Harbor Freight Tools® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS Item Description Media Tank Capacity 90 Pounds Maximum Tank Pressure 125 PSI Pressure Gauge Indicator 0 ~ 150 PSI Required Compressed Air System (Not Included) 2 HP Compressor With 3/8” Diameter Air Hose Recommended Media Type Glass Bead / Silicon Carbide Alumina / Walnut Shell / Brass Bead Recommended Use Use with 80, 100, or 120 Grit Media, at 60 PSI, with 3/32” Nozzle for best results (Run Time: 45 minutes with 90 Lbs. Media) Water Trap Type Push Button to Drain Accessories 3/32” Nozzle (Qty. 1) / 1/8” Nozzle (Qty. 1) 8 Ft. x 1/2” I.D. Hose (Qty. 1) / Blast Hood (Qty. 1) Sandblaster Gun (Qty. 1) / Pipe Thread Seal Tape (Qty. 1) Net Weight 29.70 Pounds SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. UNPACKING When unpacking, check to make sure that all the parts and accessories listed on page 15 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. SAFETY WARNINGS AND PRECAUTIONS 1. Do not operate the Pressure Blasting System if the Control Lever does not turn the tool on or off. Any tool that cannot be controlled with its Control Lever is dangerous and must be replaced. 2. Keep work area clean. Cluttered areas invite accidents. 3. WARNING! Do not operate pneumatic equipment in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Pneumatic equipment can create sparks which may ignite flammables. SKU 93889 For technical questions, please call 1-800-444-3353 PAGE 2 4. WARNING! Always wear ANSI-approved safety impact eye glasses under a full face shield, a respirator, and heavy duty work gloves when operating the 4. WARNING! Always wear ANSI-approved safety impact eye glasses under a full face shield, a respirator, and heavy duty work gloves when operating the Pressure Blasting System. Also, wear heavy duty work boots, long trousers, and long sleeve shirt. 5. Stay within air pressure capacity. Never operate the Pressure Blasting System above 125 PSI. 6. Keep children away. Children must never be allowed in the work area. Do not let them handle equipment, tools, extension cords, or air hoses. 7. Store idle equipment. When not in use, the Pressure Blasting System must be stored in a dry location to inhibit rust. Always lock up the machine and keep out of reach of children. 8. Use the right tool for the job. Do not attempt to force small equipment or attachments to do the work of a larger industrial equipment and attachments. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product, and do not use this product for a purpose for which it was not intended. 9. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 10. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running tools or air hoses. 11. Disconnect air hose and release any built-up air pressure. Never service the Pressure Blasting System or disassemble with the air hose attached. Always release any built-up air even after disconnecting hose. Disconnect the Pressure Blasting System when not in use. 12. Remove adjusting wrenches. Check that adjusting wrenches are removed from the tool and work surface before attaching to an air source. 13. Stay alert. Watch what you are doing. Use common sense. Do not operate any tool or equipment when you are tired. 14. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. SKU 93889 For technical questions, please call 1-800-444-3353 PAGE 3 15. Replacement parts and accessories. This product is to be repaired and serviced only by a qualified technician. When this product is serviced, only identical replacement parts should be used. Use of any other parts will void the war...