Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Nilfisk-ALTO, modell A17914-05-10-06

Hersteller: Nilfisk-ALTO
Dateigröße: 1.42 mb
Dateiname: b5e6d84c-eec0-4d97-8c20-85f3080af6b8.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the use of the concentrated spray stream except for very strong surfaces like concrete and steel. READ AND SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Improper connection of the equipment-grounding conductor can result in risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adapter with this product. To prevent overloading circuit, do not operate any other electrical device connected to the same circuit while operating pressure washer. EXTENSION CORDS Use additional length of high pressure hose instead of extension cords to avoid voltage drop and power loss to the motor, and to prevent overheating. DO NOT USE EXTENSION CORDS. NOTE: The use of additional length of high pressure hose will lower the pressure washer's psi below 1600. GROUND FAULT CIRCUIT INTERRUPTER PROTECTION This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the plug of the power supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection. A17914 6- ENG 7 - ENG A17914 CARTON CONTENTS Bagged Parts Nozzle Cleaning Kit Engine Frame and Wheel Assembly High Pressure Hose Chemical Hose Spray Gun Quick Connect Wand Grommet Kit with Quick Connect Nozzles Handle Operator’s Manual Registration card SPECIFICATIONS Model PCE1700 PSI Max* 1700 (11721,1 kPa) Operating PSI 1530 (10549,0 kPa) GPM Max* 1,7 Operating GPM 1,53 * Water flow and maximum pressure ratings determined in accordance with PWMA standard PW101. ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1. To Assemble Quick Connect Grommets: a. Squeeze grommet and place into hole, fitting groove to rim. b. Push grommet into place. c. Repeat steps until all grommets are assembled. 2. To Assemble Quick Connect Nozzles: a. Remove four colored quick connect nozzles from plastic bag and insert them into correct grommet. NOTE: Nozzles are color coded to match colored nozzles on panel. 3. Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place. Risk of personal injury. Avoid pl...