Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: GE Dateigröße: 1.26 mb Dateiname: stand_mixer_1066410804367.pdf Unterrichtssprache:

Read all instructions. 2. To protect against risk of electrical shock, do not put cord, plug, or Mixer body in water or other liquid. This may cause personal injury or damage to the product. 3. Close supervision is necessary when Mixer is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. 5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils, away from beaters during operation to reduce the risk of injury to persons, and/or damage to the Mixer. 6. Do not operate Mixer with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Call our toll-free Customer Assistance Number for information on examination, repair or electrical or mechanical adjustment. 7. The use of attachments not recommended or sold by the appliance manufacturer for use with this model may cause fire, electrical shock or injury. 8. Do not use outdoors or for commercial purposes. 9. Do not let cord hang over edge of table or countertop, or touch hot surfaces, including stove. 10. Remove beaters from Mixer before washing. 11. Do not place Mixer or bowls on or near a hot gas or electric burner, or in a heated oven. 12. Check that control is off before plugging cord into wall outlet. To disconnect, turn control to OFF, then remove plug from wall outlet. 13. Do not use Mixer for other than intended use. 14. Do not leave Mixer unattended while it is operating. SAVE THESE INSTRUCTIONS! Consumer Safety Information THIS UNIT IS FOR HOUSEHOLD USE ONLY. When your GE® Mixer is first used, you may experience an odor and possibly a slight wisp of smoke from your mixer’s motor. This is caused by the heat curing of the insulation, which protects the motor and is normal. After the first few uses, this will no longer occur. This appliance is equipped with a polarized plug. This type of plug has one blade wider than the other. The plug will fit into an electrical outlet only one way. This is a safety feature intended to help reduce the risk of electrical shock. If you are unable to insert the plug into the outlet, try reversing the plug. If the plug should still fail to fit, contact a qualified electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the polarized plug by modifying the plug in any way. WARNING: To reduce risk of personal injury, always unplug Mixer before inserting or removing beaters or dough hooks. BEFORE FIRST USE: Wash bowl, beaters, and dough hooks in hot, soapy water. Then rinse and dry. 2 Mixing Tips Cookie dough is one of the thickest doughs to mix. Make it easier by following these tips: • Use a large mixing bowl so that the • Add flour one cup at a time. ingredients spread out for easier mixing. • To add chocolate chips or nuts to a very • Have butter or margarine at room thick dough or batter, we recommend temperature. stirring them in by hand at the very • Add ingredients one at a time and end of the recipe. thoroughly mix after each addition. Parts and Features 1. Beater Ejector Button 2. Power Boost Button 3. Speed Control Dial 4. Mixer-Release Trigger 5. Head lock Button 6. Stand 7. Dough Hooks 8. Base 9. Dual Position Turntable 10. Bowl-Fit Beaters 11. Large Stainless Steel Mixing Bowl 12. Small Glass Mixing Bowl 13. Handle 3 Using Your Mixer How to Assemble the Stand Mixer Before assembling the Mixer, make sure the speed control dial is in the OFF position and the electric cord is unplugged. Attaching the Turntable To assure the proper positioning of the mixing bowl with relation to the beaters, the turntable has two positions. Before adjusting the turntable, decide which bowl will be used. To adjust the turntable, remove it from the base. There are icons on the base depicting a large (stainless steel)bowl and a small (glass)bowl. Place the turntable in the hole with the icon corresponding to the bowl that will be used. To attach the mixing head, press in on the Mixer release trigger, located at the rear of the stand. Place the Mixer head on the stand so that the metal pivot on the bottom of the Mixer head goes into the latched opening on the top of the stand. As you release pressure from the Mixer-release trigger, the top of the latch should clamp around the metal pivot. Once the mixing head is lowered into position, it Attaching the Mixer Head will lock into place. To tilt the mixing head, upward, press the head lock button inward while pulling up on the handle of the mixing head. NOTE: This Mixer is NOT intended for use away from the stand. 4 5 Adding the Mixing Bowl When using the large bowl, the turntable should be placed in the off-center position, where the large bowl icon is located. Similarly, when using the small bowl, the turntable should be placed in the center position where the small bowl icon is located. Mixing bowls should NEVER be used in a conventional oven, microwave oven, on top of the range or on any other hea...

Herunterladen

Geben Sie zwei Ziffern: