Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Hobart Dateigröße: 2.59 mb Dateiname: Unterrichtssprache:

The button lights and step one of the recipe displays. • Press START. • The mixer begins to run step 1 of the programmed recipe. The timer display indicates the mixer speed and counts down the remaining time. • When the time expires, the mixer automatically switches to the speed and time for the next recipe step and continues mixing. Mixing steps run in succession at the programmed speed and time. • If a Pause step is programmed in the recipe, the mixer stops and the time display counts down the pause time to 00:00 and beeps. OF STEPS SPEED TIME 2 3 PAUS 00:30 • After a Pause step, the speed display for the next step flashes; press START when ready to resume mixing. • The mixer stops after the last step. • The timer displays revert back to step one for that recipe (as shown at the top of this page). Run the same recipe again by pressing START or select a different recipe. • Mixing can be stopped at any time by pressing STOP. • The speed display flashes to indicate the program is interrupted, and the timer displays the remaining time. Press START to resume mixing. • If you do not wish to resume mixing, press the recipe button twice until it is not lit — this returns to Standard Timer Mode. Timer will beep between steps and at end of step. – 15 – Entering a Special Function Special Function Mode allows you to access three user resettable parameters: • Programming Recipes, (SEt . . .rECP), • Making Recipes Active or Inactive, (Atth . . . rECP) and • Setting the User Access Code (SEt . . . Code). [There are also other parameters for service use viewable in Special Functions.] Refer to the table, right. OF STEPS SPEED TIME _ _ SPFn turn Entering a Special Function Special Function Mode allows you to access three user resettable parameters: • Programming Recipes, (SEt . . .rECP), • Making Recipes Active or Inactive, (Atth . . . rECP) and • Setting the User Access Code (SEt . . . Code). [There are also other parameters for service use viewable in Special Functions.] Refer to the table, right. OF STEPS SPEED TIME _ _ SPFn turn USED BY SEL . . . Unit Service Technician LASt . . . Err Service Technician Err . . . Log Service Technician totL . . . HrS Service Technician LASt . . . HrS Service Technician CAP . . . HrS Service Technician RUN . . . DiAg Service Technician SEt . . . CodE Authorized Operator SEt . . . rECP Authorized Operator Atth . . . rECP Authorized Operator • Begin from Standard Timer Mode . . . (If you are in Recipe Mode, exit by pressing the lighted Recipe button to return to Standard Timer Mode.) • With no Recipe buttons lighted, press Enter for 5 seconds. SPFn . . . turn displays indicating Special Functions. • There is a one minute timeout in Special Functions Mode: After one minute of inactivity the control will automatically return to Standard Timer Mode. • Turn the Timer Dial to select one of the special functions: SEt . . .rECP, Atth . . .rECP or SEt . . .CodE, . OF STEPS _ _ SEt rECP SPEED TIME OF STEPS _ _ Atth rECP SPEED TIME OF STEPS _ _ SEt CodE SPEED TIME ENTER ENTER ENTER OF STEPS SPEED TIME _ _ CodE 0000 OF STEPS SPEED TIME _ _ CodE 0015 • Press ENTER. Enter the Access Code • You must enter the code to change any recipe parameters. • CodE . . . 0000 displays. • Turn the timer dial to the applicable access code and press ENTER. The default access code is 0015. Refer to the next three pages for the applicable function. • If the incorrect code has been entered, no is displayed in the Step Display. – 16 – Programming a Recipe [SEt . . . rECP] Programming a Recipe [SEt . . . rECP] OF STEPS SPEED TIME _ _ SEt rECP OF STEPS SPEED TIME 2 3 2 07:00 OF STEPS SPEED TIME 1 3 Stir 01:30 Recipe 5 OF STEPS SPEED TIME 6 3 Stir End Programming a Pause OF STEPS SPEED TIME 4 3 PAUS 05:30 Follow instructions in Entering a Special Function on the previous page to enter SEt . . .rECP. After entering the Access Code, the display of SEt . . . rECP indicates that you can now program a recipe. All active recipe keys are lit continuously; inactive recipe keys blink. • Press the recipe key you want to program (1–9). It stays lit. • Set the speed and mix time for step one by turning the speed and time dials; press ENTER to go to the next step. If the recipe was previously programmed, step 1 of X displays to indicate the first of up to 6 steps programmed for this recipe. The example shows that Stir speed was previously programmed for 1 minute and 30 seconds. • Set the speed and time for each step of the recipe, then press ENTER to go to the next step. Repeat for each step. • If you add more steps than were previously programmed, the step display does not update until the recipe has been saved. The step display can show step 4 of 3 during programming. SPEED TIME OF STEPS 4 3 2 02:00 • Turn timer dial counterclockwise to End to terminate the recipe. This sets the previous step as the last step. • To save the recipe, press the lit recipe button. • Continue programming other recipes; or press ENTER for 5 seconds to exi...

Herunterladen

Geben Sie zwei Ziffern: