Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
The safety concept can work only if the appliance is in a faultless condition. • Under NO circumstances should you use the appliance if parts are damaged or missing. If you do, there will be an increased risk of accidents. • Arrange for all repairs to be carried out only by specialists. If need be, approach our Service Partner responsible for your country. - 2 Do not submerge the blender or the hand mixer in water. If necessary, clean the lower part of the blender with the blade under running water. The ap-pliance could become irreparably damaged if it is submerged. • Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. Risk of Injuries: • During use, do not come into contact with the whisk, the kneading hooks or the knife on the blender. The blade of the blender is sharp. Therefore, ALWAYS handle the blender with care. Do not allow long hair, scarves and such like to hang over the mixing attachments. • NEVER attempt to assemble ancillaries with differing functions at the same time. Risk of electrical shocks. • The power cable must never come into close contact with hot parts of the appliance or other sources of heat. Do not allow the power cable to lie on sharp rims or edges. • Do not fold or crush the power cable. Items supplied 1 Hand mixer 1 Mixing stand 1 Mixing bowl with lid 2 Kneading hooks 2 Whisks 1 Blender 1 Dough scraper Operating instructions Description of Components 1 Speed switch 2 Fixture for the blender, with safety cover 3 Power cable with power plug 4 Unlocking button for the handmixer 5 Unlocking button 6 Mixing stand 7 Mixing bowl 8 Filler opening 9 Lid 0 Turbo button q Ejection button w Blender e Whisk made of stainless steel r Kneading hooks made of stainless steel t Dough scraper Unpacking • Take all components out the packaging. • Remove all packaging materials and transport restraints. • Check that all of the items listed are present and that they do not show signs of damage. Placing • Place the mixer stand 6 onto a level surface. Three suction discs have been fixed to the base of the mixer stand 6 to prevent it sliding during operation. • Ensure that the mains power socket is easily accessible in the event of a risk situation. - 3 Speed levels 0 Appliance is switched off 1 Good starting speed for mixing "soft" ingredients such as flour, butter, etc. 2 Best speed for blending liquid ingredients 3 Optimum speed for mixing cake and bread dough 4 For whipping butter to form a fine foam, sugar, for desserts etc. 5 For whipping egg whites, cake, decorative jelly, pureeing of boiled potatoes, whipping cream, etc. For operating the blender: Only usable in combination with the turbo button. Turbo: • this button allows you to have the full power of your appliance immediately at your disposal. • for operating the blender Operation Kneading and Whisking Warning: Do not operate the mixer for longer than 10 minutes in one session. After 10 minutes, allow the appliance to rest until it has cooled itself down. 1. Before the first usage, clean the attachments (w,e,r), the mixing bowl 7 and the lid 9. 2. Insert the whisk e or the kneading hooks r into the appliance until they securely and audibly engage. Always insert the kneading hook r or the whisk e with the cogged wheel into the predetermined opening (marked with a cog wheel) on the handmixer. 3. Release the mixer holder by pressing the release button for tilting 5 and lift the mixer holder upwards. 4. Remove the mixing bowl 7 and fill it with the quantities of ingredients to be prepared. Warning: NEVER fill the mixing bowl 7 beyond the Max marking (approx 2.5 l) with ingredients. If you do, there is a risk they could spill over the edge during operation. 5. Replace the mixing bowl 7 onto the mixing stand 6. 6. Press the release button for tilting 5 and lower the holder downwards. 7. Place the hand mixer on the holder so that it firmly engages. 8. Slide the lid 9 into the guiderails on the mixing bowl 6 so that it is firmly seated. Note: Should you wish to add ingredients whilst mixing, open the filler opening 8 and insert them through it. To avoid a splattering of the ingredients, be sure to reclose the filler opening 8! You can also use the hand mixer without the mixing stand 6. Especially with minor amounts of liquids you are advised to use the hand mixer without the mixing stand 6. Otherwise, the liquid may not be completely captured and thus not mixed thoroughly. - 4 Warning: Under no circumstance should you use receptacles made of glass or other very fragile/easily breakable materials. These containers can be damaged and then cause potentially serious injuries. 9. Insert the plug 3 into a mains power socket. 10. To set the mixer into motion, push the speed switch 1 to the desired speed setting. You can select between 5 speed settings or the turbo button 0 (see section "Speed levels"). Warning: Do not operate the mixer for longer than 10 minutes in one session. ...