Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Cutlery not adequately rust- resistant. Knife blades are Use corrosion-resistant cutlery. frequently more severely affected. Cutlery will also rust if rusting parts are rinsed at the same time (pan handles, damaged utensil baskets, etc.). Do not wash rusting parts. Salt content in the rinsing water too high, as salt dispenser lock not fastened firmly or salt was spilled while being refilled. Fasten salt dispenser lock firmly or remove spilled salt. The appliance does not start. The mains fuse has tripped. Power cord not inserted. Check mains fuse. Ensure that the power cord is plugged all the way into the back of the appliance and into the socket. Check that the socket functions. The appliance door has not been shut properly. Close the door. Programme starts automatically. You did not wait until programme ended. Perform reset. (See Terminating the programme). Appliance cannot be set (hardness, final rinse, ...). Appliance is in the programme. Appliance can be set at the start of the programme only. Perform reset (see Terminating the programme) and set the appliance according to the instructions for use. The door is difficult to open. Child-proof lock is activated. Deactivate childproof lock. (See instructions for use at the back) Door cannot be closed. Door lock has been activated. Close door with increased force. Door cannot be closed due to installation. Check appliance installation: Door or attached parts must close without obstruction. Cover on the detergent dispenser cannot be closed. Detergent dispenser or cover guide blocked by sticky detergent residue. Remove detergent residue. Detergent residue in the detergent dispenser or in the tablet collecting tray. Spray arms blocked by utensils, therefore detergent is not rinsed out. The detergent dispenser was damp when filled. Ensure that the spray arms can rotate freely. Pour detergent into the dry detergent dispenser only. en Customer service Fault Cause Remedial action Appliance stops Door not closed properly. Close the door. in the programme or programme is interrupted. Do not place utensils or fragrance dispenser in the tablet collecting Check whether rear panel is being pressed in, e.g. by socket or by hose holder which tray. has not been removed. Top basket presses against inner door and prevents door from being closed securely. Power and/or water supply Restore power and/or water supply. interrupted. Filling valves making Depends on domestic installation, No remedial action possible. striking noises. as appliance is not defective. No effect on appliance function. Knocking or rattling noise. Spray arm strikes the utensils, Position utensils so that the spray arms do utensils not positioned correctly. not strike the utensils. If there is a low load, the water Load the appliance with more utensils or jets strike the washing tank distribute the utensils more evenly directly. in the dishwasher. Light utensils move during Arrange light utensils securely. the wash cycle. Unusual foam formation. Handwash liquid in the rinse aid Immediately refill rinse aid dispenser with dispenser. rinse aid. Rinse aid spilled. Remove rinse aid with a cloth. 4 Customer service If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be found on the back of these instructions for use or on the enclosed customer service list. When calling, please state the appliance number (E- Nr. = 1) and the production number (FD = 2) which can be found on the rating plate 92 on the appliance door. .............. Rely on the competence of the manufa cturer. Contact us. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts for your domestic appliances. 5 Installation and connection The dishwasher must be connected correctly, otherwise it will not function properly. The specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragraphs or in the installation instructions. Install the appliance in the correct sequence: 1. Checking appliance on delivery 2. Installing the appliance 3. Waste water connection 4. Drinking water connection 5. Electrical connection Product package If you have any complaints, contact the dealer where you purchased the appliance or our customer service. . Dishwasher . Instructions for use . Installation instructions . Warranty* . Installation materials . Steam guard plate* . Rubber apron* . Power cord * depending on model Safety instructions Please follow the safety instructions under “Installation”. Installation and connection en Delivery Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash cycle. Technical specifications Wei...
Dieses Handbuch ist für folgende Modelle:Mikrowellen - BM4282EG/16 (1.85 mb)