Login:
Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Craig, modell CMP621F

Hersteller: Craig
Dateigröße: 8.82 mb
Dateiname: CMP621F-IB-E0CS1.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Do not use force when touching the touch screen, as it may cause damage to the screen. 2. To avoid damage to the touch screen, do not use any object other than your fingers to operate it. 3. Do not tap on the touch screen if your fingers are not clean. 4. Do not tap on the touch screen with gloves on. 5. The touch screen may not function if you use a fingernail or other instruments such as a ballpoint pen. 8 Battery Recharge The player has a built-in DC 3.7V, 600 mAH Lithium-ion Polymer battery. Recharge as follows: ~ Connect the player to the computer using the supplied USB cable. ~ The display on the unit will show as below and will start charging automatically. Notes: Your battery will last longer if you follow these simple guidelines for caring for and storing it. A. For normal charge, it need approximate 4 hours. B. Recharge and store the battery within the temperature range of 5°C~35°C (40°F~95°F). C. Do not overcharge (longer than 12 hours). Excessive charging or discharging may shorten the battery’s life. D. Battery life naturally shortens slowly over time. E. If you are charging the player while it is connected to a laptop computer, make sure the laptop’s battery is also fully charged or that the laptop is plugged into its power source. F. The battery is not charged in the PC Standby mode or when the hardware is safely removed. G. The rechargeable battery incorporated in this product is not user replaceable. 9 Battery Indicator = Battery full power. = Battery empty, connect the unit to the computer for recharging. It would take about 4 hours to fully recharge the battery. During charging, you can playback the music, videos or photos at the same time. Transferring Files Before you getting start to playback music, videos or photos, you should transfer those files into the player as: 1. Connect the player to the computer by the supplied USB connection cable. 2. Download the specific files into the player as download the files to others portable device. 3. After downloaded, disconnect the unit from computer. Note: ~ All the downloaded files in this setting will stored in the Root Directory in the player. You can also to created the new folders by yourself as desire. WIN98 Driver If the operation system of your computer is Window 98, installed the supplied Window 98 Driver in the supplier CD to your computer as: 1. Insert the supplied installation CD into the CD Drive in your computer; the List of Folders in the CD will appear on the computer’ s screen automatically. 2. Selected the “ WIN 98 DRIVER” and enter. 3. Selected and double click “ Msien.exe” and follow the on-screen instructions to install the software. Mini SD card This unit support Mini SD Memory Card ( Up to 4GB, Cards not included) for extending the memories size, insert a Mini SD card into the card slot as the figure below: 10 Notes: A. Insert the card into the card slot as the direction shown on the rear of unit. B. To take out the card, press the card until a “Click” is heard then pull out the card. C. Before replacing the storage card, make sure the unit has been powered off. D. When inserting the storage card, make sure the direction you selected is correct. Never insert violently to avoid damaging the card or the unit. If it doesn’t work, please check if the direction is correct. E. When the card is used for the first time, or it has been used in other device, please format it first through the Computer. You are also needs downloaded the desired musics, photos and movie into the card before installed to to unit. Important: Formatting the Mini SD Card will delete all the data on the card. Download the data to your computer before formatting the card. Operation Power on Slide the POWER Switch to right and hold approximate 3 seconds until the display turn on then release the switch. Power off In stop mode, slide the POWER Switch to right and hold until "Bye Bye" appear on the display . 11 Hold To avoid the control buttons were presses by accident, lock it by: ~ Slide the POWER Switch to HOLD position to active the lock function. " " will appear on the screen. ~ Slide the POWER Switch to center position to release the lock, " " will disappear on the screen. Volume Control During playback, press the +/-(Volume) buttons on the front of unit or tap the volume +/- buttons on the screen to adjust the volume. Reset If the unit is halt or the display becomes to abnormal. Press the RESET button by a small screwdriver (not included) to reset the unit. Main Menu When power on the unit, the main menu will appear on the screen as below: 12 Setting Menu: Tap the Setting button, the follow menu will appear on the screen: Tap the desired function twice to enter. Set the functions as below: Display Setting Power Saving Mode icon return to previously menu. Tap the ( – 30 seconds or Always On then tap the selected icon to confirm. Tap the Ў or ^icon on the screen to set the timer to 5 seconds ) icon to save the setting and exit or tap the ( ) Note: When t...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien