Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Manual allows all voltage control items below to be configurable. (Default: Auto) &&NorthBridge Volt Control Allows you to set the North Bridge voltage. Normal Supplies the North Bridge voltage as required. (Default) +0.1V ~ +0.3V The adjustable range is from 0.1V to 0.3V. &&DDR3 Voltage Allows you to set memory voltage. Normal Supplies the memory voltage as required. (Default) 1.500V ~ 1.900V The adjustable range is from 1.500V to 1.900V. Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the memory. &&CPU Voltage Control Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. &&CPU NB VID Control Allows you to set the CPU North Bridge VID voltage. Auto sets the CPU North Bridge VID voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Normal) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. &&Normal CPU Vcore Displays the normal operating voltage of your CPU. &&Normal CPU Vcore NB Displays the normal operating voltage of your CPU North Bridge. 2-3 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2012 Award Software Standard CMOS Features Item Help Menu Level . Date (mm:dd:yy) Mon, Sep 23 2013 Time (hh:mm:ss) 22:31:24 `IDE Channel 0 Master [None] `IDE Channel 0 Slave [None] `IDE Channel 1 Master [None] `IDE Channel 1 Slave [None] Halt On [All, But Keyboard] Base Memory 640K Extended Memory 766M ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults &&Date (mm:dd:yy) Sets the system date. &&Time (hh:mm:ss) Sets the system time. &&IDE Channel 0, 1 Master/Slave IDE Channel 0, 1 Master/Slave Options are: ••None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. ••Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) ••Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large. Capacity Approximate capacity of the currently installed hard drive. &&Halt On Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors," "No Errors," "All, But Keyboard". (Default) &&Memory These fields are read-only and are determined by the BIOS POST. 2-4 Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2012 Award Software Advanced BIOS Features Item Help Menu Level . `IGX Configuration [Press Enter] Load Line Control [Auto] AMD C1E Support [Disabled] AMD C6 Support (Note) [Enabled] Virtualization [Disabled] AMD K8 Cool&Quiet control [Auto] AMD APM Master Mode (Note) [Auto] CPU core Control (Note) x One Core Per Compute Unit (Note) Disabled x CPU core 1-2 (Note) Enabled x CPU core 3-4 (Note) Enabled `Hard Disk Boot Priority [Press Enter] EFI CD/DVD Boot Option [Auto] First Boot Device [Hard Disk] Second Boot Device [CDROM] Third Boot Device [USB-HDD] Password Check [Setup] HDD S.M.A.R.T. Capability [Disabled] Away Mode [Disabled] Full Screen LOGO Show [Enabled] Init Display First [PCI Slot] ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults &&IGX Configuration The settings in this submenu are synchronous to those under the same items on the MB Intelligent Tweaker(M.I.T.) main menu. &&Load Line Control Enables or disables Load Line control. This item allows you to adjust Vdroop at different levels. Enabling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load. Auto lets the BIOS automatically configure this setting. (Default: Auto) &&AMD C1E Support Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power consumption will be reduced during system halt state. Enabled If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the hardware C1E function. If not, the BIOS will enable the software C1E function. Disabled Disables this function. (Default) (Note) This item is present only when you install a CPU that supports this feature. &&AMD C6 Support (Note) Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the CPU core frequency will be reduced during system halt state to decrease power consumption. The C6 state is a more enhanced power-saving state than C1. (Default: Enabled) &&Virtualization Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems and applications in independent ...