Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
..1 x PCI Express x16 slot, running at x8 (PCIEX8) (The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.) * Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility. * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode. ..1 x PCI Express x16 slot, running at x4 (PCIEX4) * The PCIEX4 slot shares bandwidth with the PCIEX1_1/2/3 slots. The PCIEX1_1/2/3 slots slots will become unavailable when a PCIe x4 expansion card is installed. ..3 x PCI Express x1 slots (The PCIEX4 and PCIEX1 slots conform to PCI Express 2.0 standard.) ..1 x PCI slot Multi-Graphics Technology ..Support for 2-Way AMD CrossFireX™/NVIDIA SLI technology Hardware Installation Storage Interface ..Chipset: - 2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6Gb/s devices - 4 x SATA 3Gb/s connectors (SATA2 2~SATA2 5) supporting up to 4 SATA 3Gb/s devices - 1 x mSATA connector * The SATA2 5 connector will become unavailable when the mSATA connector is installed with a solid state drive. - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. ..Marvell 88SE9172 chip: - 2 x SATA 6Gb/s connectors (GSATA3 6/GSATA3 7) supporting up to 2 SATA 6Gb/s devices - Support for RAID 0 and RAID 1 USB ..Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) * In Windows XP, the Intel USB 3.0 ports can support up to USB 2.0 transfer speed. - Up to 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) ..VIA VL800 chip: - Up to 4 USB 3.0/2.0 ports on the back panel * Due to a Windows 7 limitation, please connect your USB device(s) to the USB 2.0/1.1 port(s) before the VIA USB 3.0 controller driver is installed. Internal Connectors ..1 x 24-pin ATX main power connector ..1 x 8-pin ATX 12V power connector ..4 x SATA 6Gb/s connectors ..4 x SATA 3Gb/s connectors ..1 x mSATA connector ..1 x CPU fan header ..3 x system fan headers ..1 x front panel header ..1 x front panel audio header ..1 x S/PDIF Out header ..1 x USB 3.0/2.0 header ..2 x USB 2.0/1.1 headers ..1 x serial port header ..1 x Clear CMOS jumper ..1 x Trusted Platform Module (TPM) header Back Panel Connectors ..1 x PS/2 keyboard/mouse port ..1 x D-Sub port ..1 x DVI-D port ..1 x HDMI port Hardware Installation Back Panel Connectors ..6 x USB 3.0/2.0 ports ..2 x USB 2.0/1.1 ports ..1 x RJ-45 port ..1 x optical S/PDIF Out connector .. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In) I/O Controller ..iTE I/O Controller Chip Hardware Monitor ..System voltage detection ..CPU/System temperature detection ..CPU/System fan speed detection ..CPU overheating warning ..CPU/System fan fail warning ..CPU/System fan speed control * Whether the fan speed control function is supported will depend on the cooler you install. BIOS ..2 x 64 Mbit flash ..Use of licensed AMI EFI BIOS ..Support for DualBIOS™ ..PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features ..Support for @BIOS ..Support for Q-Flash ..Support for Xpress Install ..Support for Xpress Recovery2 .Support for EasyTune * Available functions in EasyTune may differ by motherboard model. ..Support for eXtreme Hard Drive (X.H.D) ..Support for Auto Green ..Support for ON/OFF Charge ..Support for Q-Share ..Support for 3D Power .Support for EZ Setup Bundled Software ..Norton® Internet Security (OEM version) ..Intel® Smart Response Technology ..Intel® Rapid Start Technology Operating System ..Support for Windows 7/XP Form Factor ..ATX Form Factor; 30.5cm x 24.4cm * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. * Please visit GIGABYTE's website to check the supported operating system(s) for the software listed in the "Unique Features" and "Bundled Software" columns. Hardware Installation 1-3 Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: ••Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) ••Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. ••Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may locate the notches on both sides of the CPU and alignment keys on the CPU socket.) ••Apply an even and thin layer of thermal grease on the surface of the CPU. ••Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage of the CPU may occur. ••Set the CPU host frequency in accordance with the CPU specifications. It is not recommended that the system bus frequency be set beyond hardware ...