Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
(Default) &&OnChip SATA Port4-7 Type (SATA3 4~SATA3 7 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3 4~SATA3 7 connectors. As SATA Type The mode depends on the OnChip SATA Type settings. (Default) IDE Disables RAID for the SATA controller and configures the SATA controller to IDE mode. &&Enable all USB device Enables or disables the integrated USB controller. (Default: Enabled) &&HD Audio Azalia Device Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. &&Onboard LAN Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. &&Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) &&XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) &&EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) &&Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) &&USB Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. ``GFX Configuration &&Primary Video Device Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard graphics. IGD Video Sets the onboard graphics as the first display. NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the North Bridge as the first display. (Default) SB PCIe slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the South Bridge as the first display. &&Integrated Graphics Enables or disables the onboard graphics function. Auto The BIOS will automatically enable or disable the onboard graphics depending on the graphics card being installed. (Default) Disabled Disables the onboard graphics. Force Always activates the onboard graphics, whether or not a PCI Express card is installed. &&UMA Frame Buffer Size This item is configurable only when Integrated Graphics is set to Force. Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256M, 512M, 1G, 2G. ``SATA Configuration &&PORT0 Hot Plug~PORT7 Hot Plug Enables or disable the hot plug capability for each SATA port. (Default: Disabled) &&SATA Power on PORT0~SATA Power on PORT7 Enables or disables each SATA port. (Default: Enabled) ``Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port. &&Serial Port A Enables or disables the onboard serial port. (Default: Enabled) 2-6 Power Management &&Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specific time on each day or on a specific day in a month. Wake up hour/minute/second: Set the time at which the system will be powered on automatically. Note: When using this function, avoid inadequate shutdown from the operating system or removal of the AC power, or the settings may not be effective. &&HPET Timer (Note) Enables or disables High Precision Event Timer (HPET) for Windows 8/7/Vista operating system. (Default: Enabled) &&ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN. &&Soft-Off by PWR-BTTN Configures the way to turn off the computer in MS-DOS mode using the power button. Instant-Off Press the power button and then the system will be turned off instantly. (Default) Delay 4 Sec Press and hold the power button for 4 seconds to turn off the system. If the power button is pressed for less than 4 seconds, the system will enter suspend mode. (Note) Supported on Windows 8/7/Vista operating system only. &&AC BACK Determines the state of the system after the return of power from an AC power loss. Memory The system returns to its last known awake state upon the return of the AC power. Always On The system is turned on upon the return of the AC power. Always Off The system stays off upon the return of the AC power. (Default) &&Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up eve...