Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Gigabyte Dateigröße: 847.33 kb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Motherboards - GA-3CCWL-RH (459.1 kb)

..User Requires user’s password to access floppy drives. ..Supervisor Requires supervisor’s password to access floppy drives. (Default setting) 55 GA-3CCWV-RH Motherboard Server Figure 4: Server 56 BIOS Setup System Management Figure 4-1: System Management • ..........Server Management This category allows user to view the server management features. Including information of BIOS Version. All items in this menu cannot be modified in user’s mode. If any items require changes, please consult your system supervisor. 57 GA-3CCWV-RH Motherboard Console Redirection Figure 4-2: Console Redirection • ..........COM Port Address If this item allows user to determine which port to use for console reidrection. ..On-board COMA Use COMA as he COM port address. ..On-board COMB Use COMB as he COM port address. ..Disabled Disable this function. (Default setting) • .......... Baud Rate This option allows user to set the specified baud rate. ..Options 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K. • ..........Console Type This option allows user to select the specified terminal type. This is defined by IEEE. ..Options VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8 58 BIOS Setup • ..........Flow Control This option provide user to enable the flow control function. ..None Not supported. ..XON/OFF Software control. ..CTS/RTS Hardware control. (Default setting) • ..........Console connection This field indicates whether the console is connected directly to the system or a modem is used to connect. ..Direct Console is connected directly to the system. (Default setting) ..Disabled Console is connected via the modem. • ..........Continue C.R. after POST This option allows user to enable console redirection after O.S has loaded. ..On Enable console redirection after O.S has loaded. ..Off Disable this function. (Default setting) 59 GA-3CCWV-RH Motherboard • ..........After Power Failure This option provides user to set the mode of operation if an AC / power loss occurs. ..Power On System power state when AC cord is re-plugged. ..Stay Off Do not power on system when AC power is back. ..Last State Set system to the last sate when AC power is removed. Do not power on system when AC power is back. (Default setting) 60 BIOS Setup Boot Figure 5: Boot • ..........Boot Priority Order This field determines which type of device the system attempt to boot from after PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the first device is not a bootable device, the system will seek for next available device. Key used to view ot configure devices: Up and Down arrows select a device. <+> and <-> moves the device up or down. and specifies the device fixed or removable. exclude or include the device to boot. <1-4> Loads default boot secquence. 61 GA-3CCWV-RH Motherboard Exit Figure 6: Exit • ..........• About This Section: Exit Once you have changed all of the set values in the BIOS setup, you should save your changes and exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu. • .......... Exit Saving Changes • .......... Exit Discarding Changes • .......... Load Settup Default • .......... Discard Change • .......... Save Changes 62 BIOS Setup • ..........Exit Saving Changes This option allows user to exit system setup with saving the changes. Press on this item to ask for the following confirmation message: Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS. Therefore, whenyou boot up your computer next time, the BIOS will re-configure your system according data in CMOS. • ..........Exit Discarding Changes This option allows user to exit system setup without changing any previous settings values in CMOS. The previous selection remain in effect. This will exit the Setup Utility and restart your compuetr when selecting this option. 63 GA-3CCWV-RH Motherboard • ..........Load Settup Default This option allows user to load default values for all setup items. When you press on this item, you will get a confirmation dialog box with a message as below: 64 BIOS Setup • ..........Discard Changes This option allows user to load previos values from CMOS for all setup item. When you press on this item, you will get a confirmation dialog box with a message as below: 65 GA-3CCWV-RH Motherboard • ..........Save Changes This option allows user to save setup dat ato CMOS. When you press on this item, you will get a confirmation dialog box with a message as below: Press [Yes] to save setup daya to CMOS. 66 Driver Installation Chapter 4 Application Driver Installation A. NVDIA Chipset Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe. Installation Procedures: NOTE: If you are using Windows 64-bi...

Herunterladen

Geben Sie zwei Ziffern: