Hersteller: Gigabyte
Dateigröße: 1.17 mb
Dateiname:
|
Anleitung Zusammenfassung
. Supports EDO 16MB ~ 384 MB, SDRAM 16MB ~ 768MB (128Mb DRAM technology) memory on board. . Supports ECC or Non-ECC type DRAM module. . 1xAGP slot, 5xPCI Bus slots, 2xISA Bus slots. . Supports 2 channels Ultra DMA/33/66 IDE ports for 4 IDE Devices. . Supports 2xCOM (16550), 1xLPT (EPP / ECP), 1x1.44MB Floppy port. . Supports 2xUSB ports, 1xPS/2 Mouse & 1xPS/2 Keyboard. . Licensed AWARD BIOS, 2M bits FLASH ROM. . 30.5 cm x 18 cm ATX SIZE form factor, 4 layers PCB. 1-1 Introduction 1.3. PERFORMANCE LIST The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (Different Hardware & Software configuration will result in different benchmark testing results.) • CPU Pentium. !!! processor • DRAM 128MB SDRAM (Winbond 902WB W986408BH-8H) • CACHE SIZE 512 KB included in CPU • DISPLAY GA-630 (16MB SGRAM) • STORAGE Onboard IDE (IBM DJNA-371800) • O.S. Windows NT™ 4.0 • DRIVER Display Driver at 1024 x 768 x 64K colors x 75Hz. VIA Bus Master IDE Driver 4.00 Processor Intel Pentium. !!! 500MHz(100x5) Winbench99(Ver 1.1) CPU mark99 FPU Winmark Business DiskHi-End Disk Business Graphics Hi-End Graphics 37.2 2560 5660 12800 58.5 79.5 Winstone99 Business Hi-End 26.3 24.1 1-2 6VXE+ 1.4. BLOCK DIAGRAM 14.318MHz 3.3V SDRAM DIMM Sockets Floppy Port 33 MHz 33MHz Ultra DMA/33/66 IDE Ports IDE Bus PCI Bus ISA Bus AGP Bus LPT Port Keyboard COM Ports PS/2 Mouse USB Bus 14.318MHz 48MHz 14.318MHz I/O CHIPSET ITE 8671 AGP Host Bus VIA 82C693A VIA 82C596B Winbond W83194R-39A SLOT 1 66MHz 66 / 100 MHz 66 /100 133 MHz 33 MHz 66 /100 /133 MHz 1-3 24MHz Introduction 1.5. INTRODUCE THE Pentium. .... II / !!! Processors Figure 1: Universal Retention Mechanism & attach Mount Figure 2:OEM Pentium. II Processor 1-4 6VXE+ Figure 3: OEM Pentium. !!! Processor 1.6 What is AGP? ???? The Accelerated Graphics Port (AGP) is a new port on the Host-To-PCI bridge device that supports an AGP port. The main purpose of the AGP port is to provide fast access to system memory. The AGP port can be used either as fast PCI port (32-bits at 66MHz vs.32-Bits at 33MHz) or as an AGP port which supports 2x data-rate, a read queue, and side band addressing. When the 2x-data rate is used the port can transmit data at 533MB/sec (66.6*2*4). The read-queue can be used to pipeline reads – removing the effects of the reads-latency. Side band addressing can be used to transmit the data address on a separate line in order to speed up the transaction. 1-5 Specification 2. SPECIFICATION 2.1. HARDWARE • CPU . Pentium. II / !!! /Celeron processor 233 – 800 MHz. . 242 pins 66 / 100 / 133MHz slot1 on board. • SPEED . 66/100/133 MHz system speed. . 66 MHz AGP bus speed. (2X mode 133MHz) . 33 MHz PCI-Bus speed. . 8 MHz AT bus speed. • DRAM MEMORY . 3 banks 168 pins DIMM module sockets on board. . Use 16 / 32 / 64 / 128 / 256 MB DIMM module DRAM.(128Mb DRAM technology) . Supports EDO 16MB ~ 384 MB, SDRAM 16MB~768MB. (128Mb DRAM technology) . Supports 3.3V SDRAM / EDO type DRAM. . Supports ECC or Non-ECC type DRAM. • CACHE MEMORY . 32 KB L1 cache memory included in CPU. . L2 cache memory included in CPU (depends on CPU type) . . Supports DIB speed mode for L2 Cache. • I/O BUS SLOTS . 5 33MHz Master / Slave PCI-BUS. . 2 8MHz 16 bits ISA BUS. . 1 66MHz / 133MHz AGP bus. • IDE PORTS . 2 Ultra DMA/33/66 Bus Master IDE channels onboard. (Using IRQ14,15) . Support Mode 3,4 IDE & ATAPI CD – ROM. 2-1 6VXE+ • I/O PORTS • GREEN FUNCTION • BIOS • DIMENSION 2.2. SOFTWARE • DRIVER • BIOS • O.S. 2.3. ENVIRONMENT • Ambient Temp. • Relative Hum. • Altitude • Vibration • Electricity . Supports 2 16550 COM ports. . Supports 1 SPP/EPP/ECP LPT port. . Supports 1 1.44 / 2.88 MB Floppy port. . Supports 2 USB ports. . Supports PS/2 Mouse & PS/2 Keyboard. . Suspend mode support. . Green switch & ACPI LED support. . IDE & Display power down support. . Monitor all IRQ / DMA / Display / I/O events. . 2M bits FLASH ROM. . Supports Plug & Play, DMI Function. . ATX Form Factor, 4 layers PCB. . TUCD (Bus Master + AGP Driver + Utilities) . Licensed AWARD BIOS. . AT CMOS Setup, BIOS / Chipset Setup, Green Setup, Hard Disk Utility included. . Operation with MS-DOS., Windows.95, Windows.98,WINDOWS NT™, OS/2, NOVELL and SCO UNIX. . 0°C to +50°C (Operating). . 0 to +85% (Operating). . 0 to 10,000 feet (Operating). . 0 to 1,000 Hz. . 4.9 V to 5.2 V. (Max. 20A current at 5V.) 2-2 Hardware Installation 3. HARDWARE INSTALLATION 3.1. UNPACKING The main board package should contain the following: • The 6VXE+ main board. • The Retention Mechanism & Attach Mount • USER’S MANUAL for main board. • Cable set for IDE, Floppy devices. • CD for main board Utility.(Bus Master + AGP Driver + Utilities) The main board contains sensitive electric components, which can be easily damaged by static electricity, so the main board should be left in its original packing until it is in...