|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
It can be switched between AGP 2X(3.3V) or 4X (1.5V) mode by adjusting the jumper. The factory default for this card is 2X(3.3V). The GA-7VAX-A / GA-7VAX1394-A / GA-7VAXP-A / GA-7VAXP-A Ultra motherboards might not function properly, if you install this card without switching the jumper to 4X(1.5V) mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color", the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X(3.3V) only. The GA-7VAX-A / GA-7VAX1394-A / GA-7VAXP-A / GA-7VAXP-A Ultra motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work fine with VIA® KT400A based motherboards. Before you install PCI cards, please remove the Dual BIOS label from PCI slots if there is one. • The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the inf ormation contained herein. • Third-party brands and names are the property of their respective owners. • Please do not remove any labels on motherboard, thismay void the warranty of this motherboard. • Due to rapid change in technology, some of the specifications might be out of date bef ore publication of this booklet. DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible P artName: G.B.T.INC. (U.S.A.) Address: 17358 Railroad Street City of Industry, CA 91748 Phone/FaxNo: (818) 854-9338/ (818) 854-9339 hereby declares that the product ProductName: Motherboard GA-7VAX-A / GA-7VAX1394-A / ModelNumber: GA-7 VAXP-A / GA-7VAXP-A U ltra Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device SupplementaryInformation: This device complies with part 1 5 of the FCC Rules. Operation is subject t o the following t wo conditions: (1 ) This device may not cause harmful and (2) this device must accept any inference received, inclu ding that may cause undesi red operation. Representative Person’s Name: ERIC LU Signature: Eric Lu Date: April16 ,2003 KT400A Series AMD Socket A Processor Motherboard USER'S MANUAL AMD Athlon™ / Ath lon™ XP / Dur on™ Soc ket A Pr ocessor Motherb oard Rev. 1002 12ME-7VAXPAU-1002 EnglishEnglish Table of Content Item Checklist ...................................................................................... 4 WARNING! .......................................................................................... 4 Chapter 1 I ntroduction ......................................................................... 5 Features Sum mary .......................................................................................... 5 KT400A Series M otherboard Layout .............................................................. 8 Block D iagr amt ............................................................................... 9 Chapt er 2 Hardw are Installation Pr ocess ............................................ 11 Step 1: Install the Central Processing U nit (C PU) ....................................... 12 Step1-1: CPU Speed Setup .......................................................................... 12 Step1-2: CPU Installation ............................................................................. 13 Step1-3:CPU Heat Sink Installation .............................................................. 14 Step 2: Install m emory modules ................................................................... 15 Step 3: Install expansion cards ..................................................................... 17 Step 4: Connect ribbon cables, cabinet wires, and power supply .............. 18 Step 4-1 : I/O Back Panel Introduction .......................................................... 18 Step 4-2 : Connectors & Jumper Setting Introduction .................................... 20 Chapt er 3 BIOS Setup ....................................................................... 35 The M ain M enu (F or example: BIOS Ver. :E2) ............................................ 36 Standard CM OS Features ............................................................................. 38 Advanced BIOS Features .............................................................................. 41 Integrated Peripherals ................................................................................... 43 KT400A Series Motherboard -2 Power M anagement S etup ............................................................................ 48 PnP /PCI Configurations ................................................................................. 51 PC H ealth Status ........................................................................................... 52 Frequency/Voltage Control ..........................