Anleitung Gigabyte, modell GA-890GPA-UD3H
Hersteller: Gigabyte
Dateigröße: 16.14 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Select the array and press . A small window displaying the array information will appear in the center of the screen (Figure 9). Gigabyte Technology Corp. RAID Setup Utility v1.07.16G [ Main Menu ] [ Hard Disk Drive List ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving Model Name Capacity Type/Status HDD0: ST3120026AS 120 GB RAID Inside HDD1: ST3120026AS 120 GB RAID Inside [ RAID Information ] Name: GRAID Level: 0-Stripe Block: 128 KB Capacity: 240 GB Members: HDD 01 Status: Normal [ RAID Disk Drive List ] Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 [fgTAB]-Switch Window [hi]-Select RAID [ENTER]-Detail [ESC]-Exit Figure 9 7. Save and Exit Setup: After configuring the RAID array, select the Save And Exit Setup item in the main screen to save your settings before exiting the RAID BIOS utility, then press (Figure 10). Gigabyte Technology Corp. RAID Setup Utility v1.07.16G [ Main Menu ] [ Hard Disk Drive List ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving Model Name Capacity Type/Status HDD0: ST3120026AS 120 GB RAID Inside HDD1: ST3120026AS 120 GB RAID Inside [ RAID Disk Drive List ] Save to Disk & Exit (Y/N) ? Y Model Name RAID Level Capacity Status Members(HDDx) RDD0: GRAID 0-Stripe 240 GB Normal 01 [fgTAB]-Switch Window [hi]-Select ITEM [ENTER]-Action [ESC]-Exit Figure 10 Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA RAID/ AHCI driver and operating system. Delete the RAID Array: To delete the array, select Delete RAID Disk Drive in the main menu and press . The selection bar will move to the RAID Disk Drive List block. Press the key on the array to be deleted; a small triangle will appear to mark the selected array. Press . When prompted to confirm your selection (Figure 11), press to confirm or to cancel. Gigabyte Technology Corp. RAID Setup Utility v1.07.16G [ Main Menu ] [ Hard Disk Drive List ] Create RAID Disk Drive Delete RAID Disk Drive Revert HDD to Non-RAID Solve Mirror Conflict Rebuild Mirror Drive Save And Exit Setup Exit Without Saving Model Name Capacity Type/Status HDD0: ST3120026AS 120 GB RAID Inside HDD1: ST3120026AS 120 GB RAID Inside ALL DATA ON THE RAID WILL LOST!! ARE YOU SURE TO DELETE (Y/N) ? N [ RAID Disk Drive List ] Model Name RAID Level Capacity Status Members(HDDx) } RDD0: GRAID 0-Stripe 240 GB Normal 01 [hi]-Select RAID [SPACE]-Mark Delete [DEL]-Confirm [ESC]-Abort Figure 11 5-1-3 Making a SATA RAID/AHCI Driver Diskette (Required for AHCI and RAID Mode) To successfully install operating system onto SATA hard drive(s) that is/are configured to RAID/AHCI mode, you need to install the SATA controller driver during the OS installation. Without the driver, the hard drive may not be recognized during the Windows setup process. First of all, copy the driver for the SATA controller from the motherboard driver disk to a floppy disk. For installing Windows Vista, you also can copy the SATA controller driver from the motherboard driver disk to a USB flash drive. See the instructions below about how to copy the driver in MS-DOS and Windows mode. In MS-DOS mode: Prepare a startup disk that has CD-ROM support and a blank formatted floppy disk. Steps: 1: Boot from the startup disk. 2: Remove the startup disk and insert the prepared floppy disk and the motherboard driver disk (here we assume that the drive letter for your optical drive is D:\). 3: At the A:\> prompt, type the following command. Press after the command: • For the AMD SB850, type (Figure 1): (Note 1) A:\>copy d:\bootdrv\SB8xxx\x86\*.* • For the GIGABYTE SATA2, type (Figure 2): (Note 2) A:\>copy d:\bootdrv\gsata\32bit\*.* Figure 1 Figure 2 (Note 1) Type the driver directory based on the operating system to be installed. Refer to the following table for the SATA driver directories for different Windows operating systems. Operating System Directory Windows XP 32-bit Bootdrv\SBxxx\x86 Windows XP 64-bit Bootdrv\SBxxx\x64 Windows Vista 32-bit (AHCI mode) Bootdrv\SBxxxV\AHCI\LHx86 Windows Vista 32-bit (RAID mode) Bootdrv\SBxxxV\RAID\LH Windows Vista 64-bit (AHCI mode) Bootdrv\SBxxxV\AHCI\LHx64 Windows Vista 64-bit (RAID mode) Bootdrv\SBxxxV\RAID\LH64A Windows 7 32-bit (AHCI mode) Bootdrv\SBxxxW7\AHCI\Win7x86 Windows 7 32-bit (RAID mode) Bootdrv\SBxxxW7\RAID\W7 Windows 7 64-bit (AHCI mode) Bootdrv\SBxxxW7\AHCI\Win7x64 Windows 7 64-bit (RAID mode) Bootdrv\SBxxxW7\RAID\W764A (Note 2) Change the directory from \32bit to \64bit for copying the Windows 64-bit driver. In Windows mode: Steps: 1: Use an alternative system and insert the motherboard driver disk. 2: From your optical drive folder, double click the Menu.exe file in the BootDrv folder (Figure 3). A Command Prompt window will open ...
Login: