Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP/PCI CONFIGURA DETECTION LOAD Fail-Safe DEFAULTS SAVE & EXIT SETUP LOAD Optimized DEFAULTS EXIT WITHOUT SAVING ESC : Quit ^v<> : Select Item (Shift) F2 : Change Color F5 : Old Values F6 : Load Fail-Safe Defaults F7: Load Optimized Defaults F8:Flash Utility F10: Save & Exit Load Setup Default except Standard CMOS Setup Load Optimized Defaults (Y/N)? N • Load Optimized Defaults Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. 45 BIOS Setup Integrated Peripherals AMIBIOS SETUP –INTEGRATED PERIPHERAL ( C ) 1999 American Megatrends, Inc. All Rights Reserved Enhance ATAPI Performance :Disabled OnBoard IDE :Both IDE1 Conductor Cable :Auto IDE2 Conductor Cable :Auto OnBoard FDC :Auto OnBoard Serial Port 1 :Auto OnBoard Serial Port 2 :Auto Serial Port 2 Mode :Normal Duplex Mode :N/A OnBoard Parallel Port :Auto Parallel Port Mode :ECP Parallel Port DMA :Auto Parallel Port IRQ :Auto OnBoard AC’97 Audio :Auto OnBoard MC’97 Modem :Auto OnBoard Legacy Audio :Enabled MPU-401 :Disabled MPU-401 I/O Address :330h-333h FM Port (388h-38Bh) :Disabled Game Port (200h-207h) :Enabled ESC : Quit ^v<>: Select Item Sound Blaster :Disabled F1: Help PU/PD/+/-: Modify SB I/O Base Address :220h-22fh F5: Old Values (Shift)F2 :Color SB IRQ Select :IRQ5 F6: Load Fail-Safe Defaults F8:Flash Utility SB DMA Select :DMA1 F7: Load Optimized Defaults Figure 9: Integrated Peripherals • Enhance ATAPI Performance Disabled Disabled enhance ATAPI Performance. (Default Value). Enabled Enabled enhance ATAPI Performance. • OnBoard IDE Disabled Disabled OnBoard IDE Both Set OnBoard IDE is Both (Default Value). Primary Set OnBoard IDE is Primary Secondary Set OnBoard IDE is Secondary • IDE1 Conductor Cable Auto Will be automatically detected by BIOS (Default Value). ATA66/100 Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100) ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). 46 6VTXE(-A) Motherboard 47 • IDE2 Conductor Cable Auto Will be automatically detected by BIOS (Default Value). ATA66/100 Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100) ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). • On Board FDC Auto Set On Board FDC is Auto (Default Value). Disabled Disabled On Board FDC Enabled Enabled On Board FDC • Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address (Default Value). 3F8/COM1 Enable onboard Serial port 1 and address is 3F8. 2F8/COM2 Enable onboard Serial port 1 and address is 2F8. 3E8/COM3 Enable onboard Serial port 1 and address is 3E8. 2E8/COM4 Enable onboard Serial port 1 and address is 2E8. Disabled Disable onboard Serial port 1. • Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address (Default Value). 3F8/COM1 Enable onboard Serial port 2 and address is 3F8. 2F8/COM2 Enable onboard Serial port 2 and address is 2F8. 3E8/COM3 Enable onboard Serial port 2 and address is 3E8. 2E8/COM4 Enable onboard Serial port 2 and address is 2E8. Disabled Disable onboard Serial port 2. • Serial Port 2 Mode ASKIR Set onboard I/O chip Serial Port 2 to ASKIR Mode. IrDA Set onboard I/O chip Serial Port 2 to IrDA Mode. Normal Set onboard I/O chip Serial Port 2 to Normal Mode. (Default Value) • Duplex Mode Half Duplex IR Function Duplex Half. N/A Disabled this function. (Default Value) Full Duplex IR Function Duplex Full. .. [Debbie2]: .. [Debbie3]: BIOS Setup 48 • On Board Parallel port 378 Enable On Board LPT port and address is 378. 278 Enable On Board LPT port and address is 278. 3BC Enable On Board LPT port and address is 3BC. Auto Set On Board LPT port is Auto. (Default Value). Disabled Disable On Board LPT port. • Parallel Port Mode EPP Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. (Default Value) Normal Normal Operation. • Parallel Port DMA Auto Set Auto to parallel port mode DMA Channel. (Default Value) N/A Disabled this function. 3 Set Parallel Port DMA is 3. 1 Set Parallel Port DMA is 1. 0 Set Parallel Port DMA is 0. • Parallel Port IRQ 7 Set Parallel Port IRQ is 7. Auto Set Auto to parallel Port IRQ DMA Channel. . (Default Value). 5 Set Parallel Port IRQ is 5. • OnBoard AC’97 Audio Auto Set AC’97 Audio to Auto (Default Value). Disabled Disabled AC’97 Audio. • OnBorard MC’97 Modem Auto Set MC’97 Modem to Auto (Default Value). Disabled Disabled MC’97 Modem. • OnBoard Legacy Audio Enabled Enabled OnBoard Legacy Audio. (Default Value) Disabled Disabled OnBoard Legacy Audio. • Sound Blaster Enabled Enabled Sound Blaster. Disabled Disabled Sound Blaster. ...